Post of all Rims and Tires out there!

[nfpgasmask]

Hey Gene,

In the top pic you have of my VX, I am rolling on BFG A/Ts - LT245/70 R16, pre-OME lift.

I now have 265 75/R16 BFG Mud Terrains which you see in my close-up post above, post-OME lift.

Bart

[nfpgasmask]

Here is a pic of mine from Summit.
16x8
5inch backspace
+12mm offset

Clint, those are Crager Steel Wheels, right? Or are they something else?

Bart

[CrnCnn]

Clint, those are Crager Steel Wheels, right? Or are they something else?

Bart

Yeah, they are called Crager Soft 8.

[rickshaw]

WormGod
Rims are 18x8.5 Enkei RT6 (0 offset - silver/clearcoated)
Tires are Pictured - Yokohama AVS 285/60-18, Currently - Nitto Terra Grapplers 285/60-18 (Diameter 31.5 in)
(Stock height) - Front well trimming
============================================


01VX
Rims are KMC Thunder 20x9
Tires are 265/60R20 Falken Ziex S/TZ01 (Diameter 30.7 in)
(Stock height)
============================================


georgechang
Rims are FJ Cruiser TRD Limited Edition Wheels 16" x 7.5" (+15mm offset)
Part number: PT904-35071 - Gray Gunmetal
Tires are BFGoodrich All-Terrain T/A® KO 265/75/16 (Diameter 31.7 in)
(Stock height)
More Info Here
============================================


Nerve_Gas
Rims are 16x8 American Racing Mojave Teflons
Tires are 36x13.50R16 super swamper IROKs
(Lifted) Custom Independent4x 4.5" suspension lift, Custom Independent4x 3" body lift
Nerve_Gas's Build Up Thread
============================================


Lizardmen3477
Rims are 22" (need more info)
Tires are 295/35/22 (Diameter 30.1 in)
(Stock height)
============================================


jdm monkey
Rims are 16" (need more info)
Tires are LT245/75R16 Goodyear Wrangler MT/R (Diameter 30.5 in)
jdm monkey's Tire Thread
Stock height or Lifted (need more info)
============================================


Bimati
Rims are 2006 GMC Yukon Wheels
I used 2-1/4" Billet aluminum spacers on all four wheels
Tires are 265/70/17 (Diameter 31.6 in)
(Lifted) OME 912's
Bimati's Wheels & Tires Thread
============================================


JHarris1385
Rims are 16x8 Pro-Comp 8089's with 4.5 backspacing
Tires are 265-75-16 A/T tires (Diameter 31.6 in)
(Lifted) OME 912 springs

Same VX with 20" Wheels

Rims are 20" A-tech chrome wheels
Tires are 265/55-20 Yoko AVS ST (Diameter 31.5 in)
JHarris1385's Wheels & Tires Thread
============================================


VCrossfan
Rims are 16x8 Incubus 511
Tires are BFGoodrich 265/70/16 (Diameter 30.6 in)
(Stock height)
============================================


LITTLELAURIE
Rims are Rock Crawler wheels
Tires are BFGoodrich All-Terrain T/A® KO 285/75/16 (Diameter 33.0 in)
(Lifted) 3 in calmini suspension lift

Same VX with Lift removed also with New Wheels & Tires

Rims are American Racing Victor Teflon Wheels
Tires are BFGoodrich All-Terrain T/A® KO 285/65R18 (Diameter 32.7 in)
(Stock height) The front torsion bars were cranked up a tad. Looks lifted, but, no lift here!
============================================


4X4 UFO
Rims are 18x9 Helo 791 Maxx6
Tires are 285/60R18 Nitto Terra Grappler (Diameter 31.5 in)
(Stock height) (Cranked the torsion bars to level and very minor cladding trimming)
============================================


Tone
Rims are 15x8 Unique Series 252
Tires are 31x12.50-15LT Super Swamper TSL/BOGGER (Diameter 30.9 in)
(Lifted)

Same VX with different Wheels and Tires

Rims are 15x7 (3.75” offset) American Racing wheels
Tires are 29x10.15x15 TrXus STS All Terrain Radials
(Stock height)
============================================


Doc4h
Rims are 16x8 America Racing Diamond Lock rims (12mm offset)
Tires are LT265/75R16 Interco TrXus Mud Terrain (Diameter 31.9 in)
(Stock height)

Same VX (Lifted) with different Tires

Rims are 16x8 America Racing Diamond Lock rims (12mm offset)
Tires are BFGoodrich All-Terrain T/A® KO
(Lifted)
============================================


mbeach
Rims are from a 2003 Nissan Frontier SC. 16x7 (+40 Offset) -no trimming, 108mm hub bore
Tires are 265/75R16 Dunlop Mud Rover (Diameter 31.6 in)
(Lifted) OME 912 in back + 10 turns of the torsion bar bolts.
More info here
============================================


MI VX
Rims are Enkei RTS 17 X 8 (ET10)
Tires are 265/70R17 Goodyear MT/Rs (Diameter 31.6 in)
(Lifted) OME 912E and OME Nitrocharger shocks
============================================


Bagheera
Rims are 20 x 8.5 Panther 241
Tires are Goodyear GT2 285/50/R20 (Diameter 31.2 in)
(Stock height)
============================================

[Cyrk]

Cyrk
18x8 Borbet CW3 (Chrome)
Toyo Proxes S/T Tires 255/55/18
Stock height

[LittleBeast]

rickshaw, nice thread, finally we are getting organized around here

[taylorRichie]

Richie,
Who do think has 18mm offset?
I made the other changes and I will add your link at the bottom of the list.
As far as Jay's offset, I went to Mickey Thompson's site MT Classic Lock 16x8 6-5.5 are only available in (-12mm).

Thanks,
Gene

Hey Gene, sorry didn't see this... my bad.

Jays wheels I don't believe could be -12mm, Even if that's all they are [currently] offered at. I think Ryan (little beast) can help me out a bit, but here's how it goes. (My understanding, please anyone feel free to correct me if I'm wrong)

Stock wheels +18mm offset, anything less than that pushes the outward from the vehicle. If my wheels are at +10mm offset, and stick out quite a bit, then anything that sticks out less than mine would have to be between 10mm and 18mm Positive offset. Which is why I believe some of the early posted wheels are incorrect.

I think that Tom4Bren is at a 0 to +5mm offset, I'm at a +10mm and Beast is at +15mm, so based on images of our setups you could get a pretty close guess as to what people's Offset are.



Of course this makes the assumption that we all have wheels between the widths of 7" - 8.5", my wheels are 8.5" wide.

========= A little advice ============
To those of you who posted images of your vehicle, and Rickshaw has already added you to his posts, I recommend deleting your original post (or editing it) so the images aren't posted twice.

This thread is really taking off!! Good Job Rickshaw!!

[rickshaw]

I think you may be right, I made some photoshop overlays to compare offsets.

Jay's 305/70/16 (-12) vs stock (+38) 245/60-18


Little Beast 33x12.5R20 (+15) vs stock (+38) 245/60-18


Taylor Richie 33x12.5R20 (+10) vs stock (+38) 245/60-18


Calculator didn't have 33x12.5R20 so came as close in width as I could.

The side view of Jay's offset does look like (+12) not (-12).


Time to get Jay's input on this.
I will remove offsets on Jay's for now.

Gene

[LittleBeast]

Rickshaw,
once again, great work on the overlays, really helps us visual learners. Yes I would agree Jay's rims look to be around +12 to maybe even a +10 or +8, definitely not -12.

[Jolly Roger VX'er]

Hey Gene, sorry didn't see this... my bad.

Jays wheels I don't believe could be -12mm, Even if that's all they are [currently] offered at. I think Ryan (little beast) can help me out a bit, but here's how it goes. (My understanding, please anyone feel free to correct me if I'm wrong)

Stock wheels +18mm offset, anything less than that pushes the outward from the vehicle. If my wheels are at +10mm offset, and stick out quite a bit, then anything that sticks out less than mine would have to be between 10mm and 18mm Positive offset. Which is why I believe some of the early posted wheels are incorrect.

I think that Tom4Bren is at a 0 to +5mm offset, I'm at a +10mm and Beast is at +15mm, so based on images of our setups you could get a pretty close guess as to what people's Offset are.



Of course this makes the assumption that we all have wheels between the widths of 7" - 8.5", my wheels are 8.5" wide.

========= A little advice ============
To those of you who posted images of your vehicle, and Rickshaw has already added you to his posts, I recommend deleting your original post (or editing it) so the images aren't posted twice.

This thread is really taking off!! Good Job Rickshaw!!

I have to respectfully disagree with some of what is said. I KNOW that my wheels are +12mm because when I ordered them I was shooting for +10mm since Daver had what I liked in stance. I'm also a stickler for re-checking part #'s on things I order to be sure I received what I asked for. The American Racing wheels I received were the same part# I ordered so in theory if I ordered 12mm offset I should have received 12mm offset.

Also, Baxman had (0) degrees offset and that put his wheels even further out as far as wheelwell is concerned compared to Daver's. More trimming of cladding there!

The stock wheels were +38mm offset IIRC. So looking at all of this as a number-line and that backspacing specs are constant....going from +38mm (tires tucked up under wheel-wells on O.E.M. wheel) to +12mm,+10mm (outer edge of tire lines up with edge of wheel-well lip) to zero offset (outer edge of tire begins to exceed past edge of wheel-well lip) to negative offset going from low to high (say -5mm out to -15mm) results in ever-wider stance with wheels pushed out past fender wheel-well lip.

I look at Jay Dunford's VX and see no problem visualizing -12mm of offset. His tires are out past the fender wheel-well lip whereas mine at +12 mm pretty much line up with edge of fender wheel-well lip. (critical in PA as fines result if tires stick out past fender wheel-well lip.)

Now where I'm not too sure....is how changes in backspacing figures into the mix. I suspect that is what is confusing us somewhat here in that backspacing may be changing on the various wheel styles???? IIRC my wheels are 4.5" backspacing.

Also, mm's are pretty small increments of measurement. When I was trying to pick out wheels that appealed to me AND were @ 10mm offset like Daver's VX; I really wanted the American Racing "Nitro" wheel. But, the closest offset it came in was zero! So, I picked the "Breaker" wheel as it was quite similar to the "Nitro" (kind of like a cousin..lol) and it was offered at 12mm offset. Only a difference of 2mm....and that was to the good in my book in that it was 2mm closer to stock....less likely for the tire to stick out past the fender wheel-well & get fined!

If I'm wrong here guys...I'm truly sorry...as this is how I perceive it and I'm not trying to mislead anyone.


P.S.--thanks Rickshaw for posting my newest pic + info and putting together an awesome thread!

[taylorRichie]

I look at Jay Dunford's VX and see no problem visualizing -12mm of offset.

???
I have a +15mm and mine stick out further, so....?


I hate wheels.

[WormGod]

FWIW (similar to Kenny's.... somewhat)



18x8.5 Enkei RT6 (0 offset - silver/clearcoated)
Pictured - Yokohama AVS 285/60-18
Stock ride height - Front well trimming

Currently - Nitto Terra Grapplers 285/60-18



(Funny enough, the pictured wheel above is the same as mine, heh)

[nfpgasmask]

This thread is great. If we had "stickies" on this forum I would say this should be up there forever! I hope this thread helps a lot of people looking for aftermarket rims and tires.

Here are two more you should add. You will have to PM the owners for their specs, but I thought I would help out with photos:

Ascinder:


ScottHarness:


Great job on this thread! Thanks!

Bart

[tom4bren]

Sorry that I can't find any specs on my wheels. It's too difficult to make the measurements with the tires mounted on the rims. I did take one measurement that may be of interest tho: the dish is 8" deep. That's measured from the outer bead to the mounting surface of the rim.

I'll try one more time to get the rim info from the PO.

Tom

[nfpgasmask]

BTW, does anyone have info on Swordy's winch setup? Me likey.



Bart