Stock Keyless Remote Security System -Is it that easy?

[VX KAT]

Mine included an instruction sheet, but if yours doesn't come with one, no problem I can scan it and email it. It's easy as pie, 10 seconds tops.

[VX KAT]

Also....DO NOT buy from REMOTESUPERSTORE thru Amazon, the guy lied and never shipped remote & lied more...had to file Amazon claim to get money back.

Also, make sure it says OEM somewhere, or that you specifically ASK that question. I bought one that ended up being a clone, sent it back, I wanted OEM, even though it was used.

[IL]

Also....DO NOT buy from REMOTESUPERSTORE thru Amazon, the guy lied and never shipped remote & lied more...had to file Amazon claim to get money back.

Also, make sure it says OEM somewhere, or that you specifically ASK that question. I bought one that ended up being a clone, sent it back, I wanted OEM, even though it was used.

Ok, thank you, good to know, will never deal with him! :madg2:
Also, if it would be not so complicated for you, pls send me mentioned manual you've got with your remote. The thing is that one friend of mine has a remote but it was originally from Japanese domestic VX. So I would like to try to program this to work with my VX. Thanks in advance!
email: iklimov@gmx.ch

[AK Falco]

I Have a problem with my remote. doors unlocked, push button once - doors do not lock but alarm turns on......? Also passenger side lock/unlock switch in handle dose not lock doors...... ?

[VX KAT]

Maybe re-programming it may help. These instructions include how to clear a transmitter current memory and reprogram it. I can email you the full instructions and a copy of the Owner's Manual, but here's the part I'm referring to. I couldn't figure out how to attach the .pdf files here.

"To clear a lost or stolen transmitter from the system's memory, program a transmitter four (4) times. This will remove the missing transmitter from memory since only four (4) transmitter codes can be accepted.

Another way to clear a lost of stolen transmitter is to erase all transmitter codes and then reprogram them. Refer to the security system owner's manual."

[vt_maverick]

Save yourself a boat load of trouble and just buy the actual OEM remote from Merlin or IsuzuParts.com instead of those aftermarket joints. I bought my extra/replacement remote about 6 months ago for something like $35 and had it in hand 3-4 days after I placed the order. It takes about 5 minutes to program and you don't really need instructions, just use an ink pen to push-and-hold the green button on the alarm box under the driver's side dash, then keep clicking the remote until it works.

Problem solved.

[tom4bren]

"I couldn't figure out how to attach the .pdf files here."

Kat - upload it to the download section (I think that's the only place that will accept pdf & that's where it belongs anyway).