Can a water pump fall off?

[psychos2]

The water pump is behind the timing belt cover. The fan clutch mount is just bolted to the front of the motor. shawn

[ChicagoKelly]

thanks psychos2!

i wonder how the fan clutch could just come "loose" like that tho? Is that common? I didn't hit anything so this is really weird.

THANKS for any info!!

[rowhard]

Well, if the bolts were not stripped or sheared, I'd say the mechanic you paid 7500 bucks to FAILED to torque them.

[Solitude]

Well, if the bolts were not stripped or sheared, I'd say the mechanic you paid 7500 bucks to FAILED to torque them.

You may need to pressure check your cooling system, thats alot of damage to the radiator

[iamironman]

thanks psychos2!

i wonder how the fan clutch could just come "loose" like that tho? Is that common? I didn't hit anything so this is really weird.

THANKS for any info!!

SABOTAGE' !!! It's them thar RUSSKIES!!! A sleeper cell is in your village!! Manchurian Candidate!!! One phone call...
a whispered code trigger... and they go out looking for VXes...
They're jealous the US got more VXes than they did!!!
IT'S A CONSPIRACY I tell YA!!!


What? who me?? No... I'm not bored.... why you ask??




_____________________

[don moore]

looks like the fan had a cracked blade..maybe from a bad install..from a used one or instaling and coming contact with some thing.. the crack wouldnt show. but the pic showed were it was cracked .and then the give away crack.and the sound you heard might be the blade coming off as it turned..and that vibration of a missing blade would shake and maybe just maybe.. cause the bolts that were on to tight or to loose..would bend or do what happened..
thats just my guess..

sorry ..
is it me ..does the pictures seem very big
????

[ChicagoKelly]

thanks. i wanted to make the pics smaller but couldnt figure out how to do it!

so if i just tighten the fan clutch back on and reattach the serpentine belt, i should be fine sounds like.

thanks for your help!!!

[psychos2]

thanks. i wanted to make the pics smaller but couldnt figure out how to do it!

so if i just tighten the fan clutch back on and reattach the serpentine belt, i should be fine sounds like.

thanks for your help!!!

You will need to replace the fan as one of the blades is missing. And as long as none of the bolt holes are stripped you can just reattach the fan clutch. shawn

[VehiGAZ]

If the fan lost a blade first, the resulting vibration could have caused anything to fall off.

If not, we'll chalk this episode up in the "con" column on whether you should replace a working water pump "while you're in there" for another job (i.e., T-belt).

[VCrossfan]

$7500 for an engine replacement ,,they should not have replaced the Timing Belt/Water Pump because it should all be "BRAND NEW" AT THAT COST. And if your water pump falls off this means your motor has stopped, as it is part of the Timing Belt route. Sound like they snugged the clutch fan bracket bolts during re-assembly (and forgot to go back and torque them) and it's taken 6 months for them to finally work there way out. Sorry to hear about it and any garage with a good rep will take care of it...Good Luck