Front and Rear Speaker install

[tysamigo]

where do you get the "christmas tree fasteners"?

[Scott Harness]

Thanks Ryan! mine need to be done before any long road trip. very helpfull

[Toad80t]

Little Beast, where did you put the front crossovers? It looks like you still have the factory wireing installed up there.

[LittleBeast]

Little Beast, where did you put the front crossovers? It looks like you still have the factory wireing installed up there.

I used a little of the factory wiring simply to go to the crossover from the headunit and then from the crossover to the tweeters on the fronts. The crossovers are basically below the woofers in the door and on the back of the mounting plates in the back.

[Toad80t]

I used a little of the factory wiring simply to go to the crossover from the headunit and then from the crossover to the tweeters on the fronts. The crossovers are basically below the woofers in the door and on the back of the mounting plates in the back.

Do you have any rattling? Or, did you secure them some way?

[LittleBeast]

Do you have any rattling? Or, did you secure them some way?

Secured with HD two sided tape on the fronts with no rattling at all, they actually fit pretty snug before the tape, and I used HD Zip ties in the back and cannot hear any rattling back their either.

[logman]

Awesome, I still need to do my tweeters! this will help a ton.

I have some images from when I did the rear speakers, they can be found at the below link

http://picasaweb.google.com/joel.the...peakerInstall#

[Ldub]

where do you get the "christmas tree fasteners"?

Bring an old one with you (for comparison) to NAPA, or any place that sells automotive paint/body supplies, they should have something that will work.