Full Carbon Fiber Hoods (2 on hand)

[PK]

DUDE...




What if...ya wanna mark a few nut positions ?

Or...ya identify the Pre -Torqued bolts?

Or....ya line mark yer wheel nuts ?

Or...ya number/mark bits...so ya use em ALL when re-assembling



OR...some hot chick wants a pedicure!!!!!


I rest my case ...(or set down my Manbag!!! )

jo


.

Jo, you nearly had me convinced, especially with the hot chick reference.
Fortunately TaylorRitchie put it all back in perspective and my manhood is safe again.

Phew!!!!!!

PK

[Vehi-Cross-Az]

just have one more left just to update

[r6boater]

My g/f had a c/f hood on her cavalier. It never had a problem with coming open, but it did show it's age. We used "Honda Polish" on it. It's a spray cleaner/polisher that worked pretty well. I recommend it for any and all vehicles.

As for making marks for the holes... I have cut some holes in plastics for frame sliders on my motorcycles. I learned from doing that to use some silly putty or playdoh on the inside of the piece you are needing to drill. Stick in in the general area of the hole to be drilled, rest hood down on pins, marks are made on the doh or putty. Then drill through the mark. Volia, you have a perfectly marked/drilled hole.