Nicely done. Yeah those things do get hot, I hope that tape holds up, it probably will do fine. I chose to enlarge the opening of the stock rubber housing for the wires to be at a 90 degree angle still, and I then bent the metal tabs to hold the bulb tight. Although those metal tabs proved to be a little to loose on one side and hence I had a bulb blow way too soon on me (8-10 months), I called and got two replacement bulbs for $50. So when I install those new ones I will try your tape job and see how it works. Oh and the bulb I had blow on me was not from xenonrider, it was one from an ebay site, this was before I found the xenonrider dude a few years ago, his stuff seems to be high quality, didn't want you to be worrying for no reason.