R1 Concepts Brakes and Rotors

[Jolly Roger VX'er]

http://store.r1concepts.com/Items/It...20Brake%20Pads

http://store.r1concepts.com/Items/It...20Brake%20Pads

http://www.vehicross.info/forums/sho...ighlight=Axxis

I just installed a full set of the Frozen Rotors on the IronMan along with Axxis Ultimate pads and am very satisfied with the results. The rotors were obtained from TireRack and are the same fitment as Trooper/Rodeo.

I chose the Axxis pads based on what a lot of the Subie crowd was running at the rallycross events and rallysprints, plus there are a couple of VX'ers who have had great results with them.

I'm running R1 Concepts with PBR/AXXIS Ultimate Pads with Independent 4X4 S.S. brake lines and flushed the braking system before refilling with Valvoline Synthetic dot 3 & 4 brake fluid (still glycol based).

I spiked the brakes at about 50mph after they were broke in and it stopped on a dime & gave me 9 cents of change back! I just hope it stays that way!

I did alot of reading on the internet about drilled, slotted rotors to understand it myself. As mentioned in earlier posts....cross-drilled rotors help to vent/shed heat away. Slotted rotors help to "scrape" or "freshen" the pad surface to keep your pads at optimum levels of performance. Drilled & Slotted rotors supposedly offer both features in one package.

Reading this I would expect more amounts of brake dust from slotted rotors as they are scraping the pads. I have noticed more brake dust on my wheels but simply clean them periodically with wheel cleaner when washing the VX.