Results 1 to 15 of 24

Thread: need help and advice Transmission rebuild

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Jun 2005
    Location
    01 Dragon Green VX 1286
    Posts
    423
    Thanked: 0
    Yes.. I researched it on Isuzu.com and 99's hat a 6/60.. oops!

    well hopefully its that mode thingy the others are talking about.. I will back out and watch.. good luck!

    Jeff

  2. #2
    Member Since
    May 2006
    Location
    2001 Foxfire 1232
    Posts
    234
    Thanked: 0
    Part # is 8960175110. isuzuparts.com calls it a neutral safety switch and lists it for $158.82 + shipping

    Merlin: http://isuzu.stcharlesauto.com/Department-Parts.aspx

  3. #3
    Member Since
    Oct 2003
    Location
    1999 white
    Posts
    42
    Thanked: 0
    (Zorak) Thanks You

  4. #4
    Member Since
    Oct 2003
    Location
    1999 white
    Posts
    42
    Thanked: 0
    (Zorak) If not the neutral safety switch problem ....what do you thing ??? any scanner can find the problem? what do u can suggest

  5. #5
    Member Since
    May 2006
    Location
    2001 Foxfire 1232
    Posts
    234
    Thanked: 0
    Quote Originally Posted by DLNTHO View Post
    (Zorak) If not the neutral safety switch problem ....what do you thing ??? any scanner can find the problem? what do u can suggest
    You might try doing a search under "transmission slipping" or something similar and see whether anyone else here had similar problems with their tranny that turned out not to be the mode selector swtich. I don't think this will throw a code so not sure a scanner would reveal anything, but I could be wrong.

    The other apparent indicator of a mode selector switch fault is that when you get the clunk, the gear indicator light on the instrument panel does not indicate the correct gear: either it is out altogether or shows a gear other than the one you are in. If you notice this happening then the mode selector switch is probably the culprit


    Good luck. Anyone else want to chime in here, feel free.

  6. #6
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    you covered it pretty well zorak.. if you had it into a shop already i assume they checked the fluid level.. but it cant hurt to check it again, a few members have had slipping caused by low fluid level

    my first guess would be the mode selector switch, the flickering/incorrect gear indicator on the gauges is another symptom of it going bad, but it does not always happen so even if you dont have that symptom, still start with the selector switch


    "Engineers believe if it ain't broke, it doesn't have enough features yet"

  7. #7
    Member Since
    Oct 2003
    Location
    1999 white
    Posts
    42
    Thanked: 0
    (etlsport) Thanks of the advice

    (Zorak) Thanks ...I already installed neutral safety switch and I take the road test (stop the car and accelerating I feel the first gear (only) slips (hesitates)) but not the all time. What do u thing I need to do... change the transmission filter or change transmission fluid . If I want to check the transmission fluid and how to tell the fluid level is good.

Similar Threads

  1. Replies: 61
    Last Post: 03/02/2016, 09:31 AM
  2. Transmission went out:( Replace or Rebuild??
    By Ruflyf in forum VX Troubleshooting...
    Replies: 3
    Last Post: 01/07/2014, 09:51 AM
  3. transmission problem or need rebuild
    By DLNTHO in forum VX Troubleshooting...
    Replies: 2
    Last Post: 08/05/2009, 02:44 PM
  4. manual transmission advice (not in VX)
    By etlsport in forum VX Talk...
    Replies: 15
    Last Post: 02/10/2007, 07:50 PM
  5. Transmission rebuild?
    By coachreed in forum VX Talk...
    Replies: 15
    Last Post: 02/01/2004, 08:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails