33 foot tall tires??? that I gotta see![]()
33 foot tall tires??? that I gotta see![]()
[SIGPIC][/SIGPIC]
Put a smiley after you say that Bub.
Well, I just got my 912s from Rocky-road, but it took almost a month. I would call them direct and see if they have any in stock that can ship right away, otherwise I would find somewhere else...
Bart
check out http://pureisuzu.com
a bit more pricey but they maybe able to get it there fast..
I'll be bringing a "used less than a year" set of 912's to Moab...
I'll give Jack (PB Kid) first dibs, if he doesn't want em', the first person with a C-note gets em'.
That price includes me doing the majority of the install & T-bar crank.
I bring all tools, jack, & jack stands to the party.
Last edited by Ldub : 04/23/2008 at 04:31 PM
When Biju gets his stock springs to me....I will sell you mine like I said. Its up to you. Let me know
It took me almost a month to get coils from Rocky because they don't actually stock them. Independent4X has them in stock for immediate shipping.
The coils alone may not satisfy you on the lift. I used the one-inch spacers atop the 912s and it seemed perfect. Then, of course, you should also get the front end ball joint spacers and do the ball joint flip along with the low profile snubbers then the torsion bar adjustment. Also the polyurethane front & rear anti sway bar bushings, the Extreme Duty lower links (that way you can center the wheels in the center of the rear wheel wells front to back), Extreme Duty upper link (to align the drive shaft, u-joint with the rear axle and then a front end alignment. With a slight nose-down attitude (which looks awesome) you may have to adjust your headlights upward somewhat.
Navi
Should be plenty of places to order them (Rocky Road Outfitters). If you don't have time to take care of there, let me know and you can ship them to my address and I will also try and suck-up to the roommate and see if he will help get you lifted when your here (he helped me). The hardest part is getting the bolts un-stuck. If everything comes off nice, should be no more than an hour. We normally have all the tools needed at my place.
Darrin