Tranny fluid mystery bolts???

[Joe Isuzu]

Um so those things are NOT stock? That is what I have.

Well good, I feel better that I'm not the ONLY one who has something goofy like this going on underneath my VX.
I will fiddle with it more tomorrow to see if anything I have will fit that small hole. I have to wonder what benefit this contraption is over OEM. If anybody knows anything else on this, please chime in. Thanks!!

[JHarris1385]

Mine has never been serviced and those are what are on mine.

[Ldub]

Well good, I feel better that I'm not the ONLY one who has something goofy like this going on underneath my VX.
I will fiddle with it more tomorrow to see if anything I have will fit that small hole. I have to wonder what benefit this contraption is over OEM. If anybody knows anything else on this, please chime in. Thanks!!

They could have run into a supply issue at the factory where the 4L30E is made, & had to find an alternate source of plugs.
Could also be an improved design, to lessen the chance of over tightening & stripping the threads?

[Joe Isuzu]

I'll know more once I get them off

[Joe Isuzu]

dang, upon closer inspection, it sure looks like a torx bit would work and I thought a t-40 was the right side, dang thing didn't budge at all and I almost go to the point where I was going to strip it,
this sucks
come on mechanics of the VX world, is anyone familiar with these things?
please?

[rocket man]

This transmission was built in France, then shipped to Japan, to install in out trusty steeds...

France has always liked to be on the cutting edge of being, "different" or is the more approiate word, "strange".....

I would order replacement plugs from Isuzu then r&r..but beware this may be a "re-threaded" replacement and the stock no longer fit's Perhaps the previous owner did this masterpiece

[JHarris1385]

I really doubt the previous owner did that. I have the same bolts and I have seen the same in the gallery here as well. It seems like some were shipped this way.

[nfpgasmask]

OK, how many of you have a 2000 VX with those type plugs? I have a 2001 and mine do not look like that either. Maybe this is something on the 2000s only, and the 99s and 01s have the "regular" type plugs?

Bart

[rocket man]

Wow, bummer for you to have this problem. Not so much a "problem" I guess as it is an agravation...as its a super easy fix, with the right tools and equip...

If your going to service the transmission anyway, you need to replace/or should replace the filter. It is in the same oil pan.

So you'll need and oil pan gasket and filter too...remove the oil pan bolts. It's probably gonna leak, but sometimes they've been on there so long, they may be on there pretty good. If so, gently tap on the pan walls, or carefully pry it open. Be sure to keep one of the corner bolts on....but loosen it about a full turn or two...you'll need a low profile(if you doing this on your back) wide radius pan to catch the oil when it finally gushes out (do this after the engine has cooled off....Once you have the pan off...Drill out these odd plug's and replace or take it to a transmission shop and ask them if they could kindly remove them, they'd probably do it for free. Auto Zone probably has these plugs and filter or Napa. Or order from Merlin or local Isuzu dealer...also these plugs may be availabe at your local Acura dealer...as your transmission is identical to a 1998-99 Acura SLX 4x4 3.5 w/tod...


Good luck