Tranny fluid mystery bolts???

[Joe Isuzu]

i know the transfer case has bolts like that that just take a 3/8" socket extension to plug into it and unscrew it

Thanks for the help Etlsport,
don't laugh, but do you mean like a torx bit or something similar? You can tell I didn't grow up a mechanic....

[nfpgasmask]

Maybe take some pics and post them so we can point out what is what.

Bart

[johnnyapollo]

Almost sounds like someone's plugged tranny cooler adapters...

[Joe Isuzu]

thanks guys, I will be try to be more helpful and post pictures tonight

[etlsport]

on the transfer case the fill and drain bolts are circular with a square hole, you just stick the end of your 3/8" socket wrench in there (makes it easier if you use an extension) in there instead of putting a socket on the end of the ratchet

[Joe Isuzu]

alright skilled mechanics and great knowers of all things, what the heck are these things and how do I get them off so I can do a transmission fluid change???

[Ldub]

I don't even know what to think about that...does an allen wrench fit them?

I would have some stock ones on hand before I thought about vice gripping, or pipe wrenching them out...maybe they were stripped by the previous owner?...or a transmission shop?...
Anyone recognize these as a "quick fix" someone might have done???

Yikes.

[IndianaVX]

?????zooming in, it does look like the holes are "hex-ish"
im with lub, i would have on hand the plugs that are SUPPOSED to be in there.
side thought, there must be a tool that takes advantage of that hole in the center, like visegrips, with a pin for the center, to keep the grips from comming off. ya got me???

maybe take your pics to a snap on tool, or mac, and see what they say. they might have a tool??