Also, don't forget to paint your calipers when your knee deep in this project already. Did mine with a two part brushable epoxy so there was no masking involved. Just remember to clean with a solvent and brake cleaner (naturally) and scrape off the rust first! Well worth the extra time:





Also used the R1 Concepts rotors. Cheaper than the OEM,s IIRC.

eBay link:

http://cgi.ebay.com/ebaymotors/ISUZU...spagenameZWDVW

And don't scrimp on the pads! I ran out of dough and used Raybestos, but think the extra dough and a little patience would have made a difference. OEM from Merlin! 'Nuff said!
Best,