How do I replace the front brake rotors?

[MSHardeman]

FOUND IT!! I knew that I downloaded an indepth how-to regarding repacking the front bearings (see link below), but this may be the same one that you found. In the instructions they tell you how to modify a Ford (I think) hub tool into the hard-to-find Isuzu version. I don't remember reading about re-tapping holes so maybe I should read it again before I go diving into this.

http://www.planetisuzoo.com/articles...Bearing_Repack

I'm with Dub, though. I don't have darn near $800 to spend on a bearing repack/ disc replacment, and I really don't want some shop jockey trying to get my VX in before lunch and forgetting to replace half of the stuff he took out. I've actually never had an issue with any shop I've been to, but I've heard horror stories of mechanics forgetting to put oil pan plugs back in during an oil change. OUCH!!

I say give it a shot.

[Ascinder]

That hub tool is unnecessay, just use a punch or screwdriver and gently tap with a light mallet, it'll come right off. To reinstall do the reverse and check the preload with a fishing scale.

[VehiGAZ]

check the preload with a fishing scale.

Um, huh?

[JHarris1385]

Man this makes me love my mechanic evenmore. He only charged me $25 to repack my front bearings.

[Kenny]

Um, huh?

It shows it in the planetisuzu guide and maintenance manual.
Easy to do.

[Rooster]

Just did my brakes today. What a PITA...

Not hard, but my VX has been sitting for some time and a good coat of rust settled in..

[CowboyErik]

What are the benefits repacking bearings when swapping rotors; is it better to replace those also?

[Ldub]

What are the benefits repacking bearings when swapping rotors; is it better to replace those also?

All lubricants break down with time/use.
Examine the bearings upon disassembly/cleaning, if there is any sign of scorching (brown-almost black discoloration on the rollers), they should be replaced.(I found new @ Auto Zone)
Some replace bearings every time they are due for repacking (every 30-40k), because they aren't THAT expensive, & since you already have it all apart anyway, why not.
Any bearing that is replaced, should also have a new race, the part that the bearing contacts inside the hub, all new bearings come with a new race.

Always replace the seals.