"I got BIG tires and I cannot lie"

[Dumke]

Oh no i went last yr just not all week. If they get stratched they get scratched its all part of it. Cant be a sissy about it. It will suck but they can be repainted or will just have scratches. I am not going to go balls to the wall beating the piss outta them. But on teh flip side I am not going to pamper them and leave the truck in the Mc deez parking lot either

[Dumke]

looks SWEEEET
Where do I get a lift kit like that? I'm sick of sittin' stock...

https://id211.chi.us.securedata.net/...roducts_id=192


Almost every piece I bought.


and this is what I did buy

https://id211.chi.us.securedata.net/...products_id=11

Course the top has the HD tie rods and such among other tid bits I added to my order. If the top one was available at the time would ahve gotten it.

Now with that the one I bougth did come with the 9000 xl's... that is just and old picture they have.

[Dumke]

ok, so im getting ready to buy my tires and rims....so im basing my spacing and width off of yours, except im going with 16 inch rims, so if i tell them i need 16x9 6x5.5 and 31 inch tires i should be good????
sorry, the guys at the tire shops are freakin idiots and cant figure out what im looking for, so maybe if i bring them in some numbers they can figure it out.
does the 16x9 6x5.5 include offset???? that seems to be the hardest part to figure out.....

Ok now for you pbkid. I basically looked at what Bart had on his set up to see what would fit on mine. Which if I am not mistaken or maybe he can chim in or do search for his chamber rims. I think is was 6x4.4 maybe??? So I basically just used the search function and looked at who was running what and also looked at thier pictures to see how much it stuck out and got my solution from there. If you can get them to be nice enough to try a few different combos then that will work as well. I just got lucky on the first try but it was a try on first to see if it work, even tho I had already paid so I could have gone different ways. My numbers I am running are in the above post, so look in my gallery and that is how much they stick out of wheel well. I would say maybe 1.5 inches maybe a little more. I am going dub route because even tho legal to stick out in Texas its not legal everywhere.

Lasly because i think i just wrote a novel there. I would go else where to find someone that does know. There are sites out there that should tell you and let you play with options to see what fits.

[pbkid]

ok, well i know that i want 16x9...and i know the bolt pattern, i just need to figure out what type of offset to tell the shop who is ordering them. they said it was +25 offset stock so i dont know if that means i need +27 or +23 to get 2 inches of offset outward to fit wider tires under there...

[CrnCnn]

https://id211.chi.us.securedata.net/...roducts_id=192


Almost every piece I bought.


and this is what I did buy

https://id211.chi.us.securedata.net/...products_id=11

Course the top has the HD tie rods and such among other tid bits I added to my order. If the top one was available at the time would ahve gotten it.

Now with that the one I bougth did come with the 9000 xl's... that is just and old picture they have.

That top lift is sweet all you need is drop brackets and you are set.... I know what Im saving for next.