So how long did it take for you to get the springs? I am hoping to get them sometime next week. What will the bump stops do for you?Originally Posted by LittleBeast
Bart
Super VXer
So how long did it take for you to get the springs? I am hoping to get them sometime next week. What will the bump stops do for you?
Bart
Super VXer
Well, they (rockyroad dudes) were fast on the e-mail replies but I ordered on Feb 28th, and they were delivered March 21st. But they had none on hand and were waiting on a truck or something.
The extended bumpstops will hopefully keep the wider larger tires from rubbing the inside fender or outside cladding. Basically under flexing the larger tires would hit and rub on stuff and the extended bumpstops will stop them on up travel before the tires can hit and rub anything, hopefully. Zeus and others have done this and worked well.
Energy Suspension Part # 9.9104R (for red ones) - "Designed with a large reinforced metal plate welded to a mounting plate and molded-in. 4 1/2" tall,
2 1/2" wide. 2 per set" Evidently if you do this all you have to do is take off the old bumpstop and mount and seperate the two so you can use the stock mount with the new bumpstop. Zeus has photos of this: http://www.vehicross.info/gallery/sh...37/ppuser/1999
Super VXer
Cool, thanks. Hopefully I will get my 912s quicker! What size tires are you running? I am going to go with 265s I think...
Bart
Super VXer
Yeah I was planning on doing what LDub did with the 33x12.5 Nitto Mud Grapplers, on 20x8.5" Zinik Z26 (Chrome with black insert). I have been running 285/60-18 with no lift and if I was going to stay with the stock rims, which I talk myself out of everyday, I was going to go with 285/65-18 Nitto Terra Grapplers. I just know myself well enough that if I don't go big, I will go home and wish I did. Go big or go home (and order bigger).....
Super VXer
Yeah, loose the stock rims. You won't regret it! I still absolutely love my Chambers...and once I lift and slap on 265 BFG M/Ts, I know I will be happy with the (even tougher) look.
Bart
Super VXer
After you posted this, I went and got some. By "seperate" you mean have to cut off some, but not all of the factory stops. If you look at Zeus' pic, you can see that about 1" of the factory stop remains. I am going to use some square 2" steel tubing instead, I think it'll support it better. Just an FYI, I was expecting 1 1/2" longer bumpstopsEnergy Suspension Part # 9.9104R (for red ones) - "Designed with a large reinforced metal plate welded to a mounting plate and molded-in. 4 1/2" tall,
2 1/2" wide. 2 per set" Evidently if you do this all you have to do is take off the old bumpstop and mount and seperate the two so you can use the stock mount with the new bumpstop. Zeus has photos of this: http://www.vehicross.info/gallery/sh...37/ppuser/1999.
The reasonable man adapts himself to the world; the unreasonable man persists in trying to adapt the world to himself. Therefore all progress depends on me.
Super VXer
Dude totally sorry, I was just looking at that myself, as I just picked them up from 4 wheels parts myself. Yeah it does look like he used some of the old bumpstops..... Hmmm..... I am sure we will figure something out. 2" steel tubing as a spacer? Are you going to use the new bumpstops or take them back?After you posted this, I went and got some. By "seperate" you mean have to cut off some, but not all of the factory stops. If you look at Zeus' pic, you can see that about 1" of the factory stop remains. I am going to use some square 2" steel tubing instead, I think it'll support it better. Just an FYI, I was expecting 1 1/2" longer bumpstops
Posting Permissions
Reply With Quote