windshield washer

[etlsport]

try putting a needle in the nozzles, maybe they are stopped up, also check for leaks in the hoses in that area

[mdwyer]

I had the same problem. I couldn't find anything clogging mine, so I removed them and swapped them. Now, at least the driver's side gets a decent squirt.

[johnnyapollo]

Remove the rubber tube and make sure it's not clogged - then get a thin piece of wire (if you can strip a twisty tie that's about the thickness you need) and insert into the squirty holes to remove obstructions. You might want to remove the tube from the other end and blow though it. When they get clogged up it's usually caused by wax getting into the opening.

-- John