Cloudy headlights -fixed

[VehiGAZ]

I used a gel-formulation crazy glue on mine. You will have to clean off the residue they leave behind first.

I actually replaced the weather stripping on mine altogether when I refinished my headlights.

[don moore]

thx

[VX KAT]

I used 1500 sandpaper and the Plast-X. It worked pretty good, but sounds like others have gotten even better results.

I used a foam type applicator on my orbital buffer to apply the Plast_X....what type did you guys use?

Do you hand rub with the 1500 or use buffer?

[JoFotoz]

I used 2000 grit ...rubbed out on a steel sheet first ,to make it even finer..

Do you hand rub with the 1500 or use buffer?

...then Plast-x on red conical foam buffer mounted on a hand drill.

They look like new....but its scary how bad they look after the sand papering!

jo

[pbkid]

i just tried buffing mine with foam applicator and rubbing off with terry cloth... worked great on the headlight that was a little hazy...but didnt work at all on the headlight that is really really bad...

maybe ill try the sandpaper and see what happens...

[JoFotoz]

Hey pbkid...I'd use worn out 2000 grit to start if I were you.

Loads of water , even a little dish soap.

Its gonna look HORRIBLE at first..
...but the Plast-x takes out all the marks ,eventually!


jo

[VX KAT]

Yeah, I freaked when I first rubbed the 1500 and saw what it did! It says Plast-X has "diminishing" abrasives, so I had to keep applying it and applying it to the foam buffer...but the abrasives seem to break down/diminish pretty quickly.

I did each for like 20 mins & lots of Plast-X, but I've got to do some more with the 1500 & then buff forever. They definitely improved, but I think I can get them better.

Not sure if adding Blue Magic might help here? Don't know if it has abrasives or chemical? Anybody know?

[VCrossfan]

I used 1500 sandpaper and the Plast-X. It worked pretty good, but sounds like others have gotten even better results.

I used a foam type applicator on my orbital buffer to apply the Plast_X....what type did you guys use?

Do you hand rub with the 1500 or use buffer?

Kat I used 1200 then 1500 both with water and Ivory soap..Then buff