Exporting to Canada

[Ldub]

Try pm'ing Kenny, he's already jumped through all those "hoops".

[Kenny]

I guarantee it's a lot more complicated than you think if you haven't been to the www.riv.ca site yet...
US customs is as easy as you say, but Canada Customs will require a broker to do the paperwork - if you try yourself and miss something you could get refused - oh it also has to have the paperwork in place before you bring it to Canada. You only have a certain amount of time to get it approved by RIV, or it goes back to the states. My importer, a local Ford dealership - had experienced two failed attempts. Both cars were purchased but refused entry - one being on the "not approved list" and another that didn't have the paperwork in place and took too long and some complications arose. Both cars had to be re-sold in the US.

Good luck getting a VX that is not meeting the stock requirements through the border. It's possible, but by the RIV requirements, the vehicle has to be bone stock as per the federal sticker of the drivers door. You never know when someone is going to be picky, so it's a big gamble. The safest way is to take off any lift, take out any supercharger, and put the stock size tires on it.

Then all it pretty much needs is DRL and child seat hooks, the rest is just garbage stickers nobody puts on anyways. Once you have the new Canadian Sticker to put next to the US Motor Vehicle sticker on the drivers door opening, then put back the lift and tires etc...

The RIV site will give a full list step by step to importing.

A big help would be for the Canadian to have a good relationship with a car dealer who is registered with RIV to do the "conversion". They may be able to get some stuff squeaked by - especially if he can get the fog lights to be the DRL - not the headlights. Depending on the province, there may be a vehicle safety required too - i.e. brake pad thickness, brake rotor thickness, tire wear, all lights work, wear on wiper blades, yadda yadda...

oh what fun.

[kpaske]

...it also has to have the paperwork in place before you bring it to Canada. You only have a certain amount of time to get it approved by RIV, or it goes back to the states. My importer, a local Ford dealership - had experienced two failed attempts. Both cars were purchased but refused entry - one being on the "not approved list" and another that didn't have the paperwork in place and took too long and some complications arose. Both cars had to be re-sold in the US.

I've looked over the RIV site a little bit just to help understand what all is involved, and from what I read, the only thing that needs to be done in Canada when crossing the border is submitting the Vehicle Import Form 1 - then the buyer would have 14 days to pay the RIV fee and taxes, and a total of 45 to complete the rest of the requirements. Is there more to it than that? What needs to be done in advance on the Canadian side?

Good luck getting a VX that is not meeting the stock requirements through the border. It's possible, but by the RIV requirements, the vehicle has to be bone stock as per the federal sticker of the drivers door. You never know when someone is going to be picky, so it's a big gamble. The safest way is to take off any lift, take out any supercharger, and put the stock size tires on it.

Yeah, this part worries me. I don't have a supercharger, but I do have a lift and oversize tires, and taking them off would be a big hassle for me. So the RIV is actually going to inspect the vehicle when it crosses? I thought those things wouldn't matter until the buyer went to get his inspection sticker? I have no plans to do the modifications on my end - this is something the buyer would take care of once inside Canada.

A big help would be for the Canadian to have a good relationship with a car dealer who is registered with RIV to do the "conversion".

So an individual can't just file the paperwork by himself? The buyer has to use a car dealer?

[Chopper]

Kenny, isn't there some kind of provisions for hot rods and such? I'm curious, because twice, I've sold HEAVILY modified cars to Canadians. As far as I knew, these cars were going home with them...and an act of god would have been necessary to make them anything like stock. They just paid their money, and took their cars Maybe you gotta mod the VX more.

[Kenny]

Kenny, isn't there some kind of provisions for hot rods and such? I'm curious, because twice, I've sold HEAVILY modified cars to Canadians. As far as I knew, these cars were going home with them...and an act of god would have been necessary to make them anything like stock. They just paid their money, and took their cars Maybe you gotta mod the VX more.

My guess is that those vehicles are older than 15 years, then they are exempt. If they are less, then they probably got in under the radar. As I was saying, it all depends if you have a buttmunch approving your entry. I think 99% of any modified vehicle will make it through if the way is smooth with people you know - but all it takes is for some stickler to pull out the "rules" and things could get ugly.

[Kenny]

I've looked over the RIV site a little bit just to help understand what all is involved, and from what I read, the only thing that needs to be done in Canada when crossing the border is submitting the Vehicle Import Form 1 - then the buyer would have 14 days to pay the RIV fee and taxes, and a total of 45 to complete the rest of the requirements. Is there more to it than that? What needs to be done in advance on the Canadian side?

Yeah, this part worries me. I don't have a supercharger, but I do have a lift and oversize tires, and taking them off would be a big hassle for me. So the RIV is actually going to inspect the vehicle when it crosses? I thought those things wouldn't matter until the buyer went to get his inspection sticker? I have no plans to do the modifications on my end - this is something the buyer would take care of once inside Canada.

So an individual can't just file the paperwork by himself? The buyer has to use a car dealer?

Sure a person can do all this himself, but it could be a bit of a gamble if you've never done it before with all the paperwork involved. I'd suggest a car dealer or at the least directions from someone who knows exactly how to do it. Brokers are cheap - they can save headaches.

I used a car dealer as that is what Canada Customs recommended to me to make it as hassle free as possible. The dealer with their customs broker added a level of legitimacy that made things go smoother. If you try yourself and miss a step and end up with a border guard with an attitude - they won't be very helpful and can be downright nasty.

The order of paperwork is correct, but don't wait until it's in Canada to go find a RIV approved mechanic to put in the DRL and do the check over. The importer should have someone lined up to do the work and approvals before it arrives. As I said, if they have a good relationship with the mechanic, then those mods will likely fall under the radar. If you pick someone out of a hat, they could use the "no mods allowed" to pull a fast one and get a crap load of work to un-mod the vehicle.

It also helped me a lot to have a dealer who could waive the state tax since I bought mine from a dealer. Different story if going private from you.. (but I'm not sure how it work for you.. I can get my provincial taxes rebated after I sell if I buy another car within 6 months in the province)

The RIV sticker is a FEDERAL sticker stating it meets all the requirements to get into Canada. You need that in order to start the process to get a PROVINCIAL inspection and insurance (at least in my province where insurance is NOT private - it's controlled by the 'guvmint) The Canadian sticker compliments the US Federal sticker (which has tire size and curb weight on it - hence the recommendation to go stock) It's not clearly stated, but that is the information I got from talking to RIV in my research to import a VX due to the typical lift mods and S/C that were out there.

[Chopper]

Yep...older than 15 years

[kpaske]

OK, so i'm still a little unclear. Am I actually required to stop at Canadian customs to obtain this RIV sticker, or can I just clear US Customs, deliver the vehicle to the buyer, and let him and his broker worry about the federal RIV sticker, provincial inspection, etc?

[Kenny]

OK, so i'm still a little unclear. Am I actually required to stop at Canadian customs to obtain this RIV sticker, or can I just clear US Customs, deliver the vehicle to the buyer, and let him and his broker worry about the federal RIV sticker, provincial inspection, etc?

US Customs just needs to see the pink slip and match it to the car to make sure it isn't a stolen car leaving the country.

Technically you need to have the vehicle paperwork cleared before brining it into Canada. That's the export paperwork - the RIV stuff is separate. But you may be able to get it through the border - you will have to decide to how you answer the border guard's question "purpose of your visit" and "any gifts or items you'll be leaving in Canada". If you're truthful, they may be nice and let you through or maybe not... If you lie, they could seize the car later being imported under false pretenses, very very tough to prove and unlikely to happen -

But hey, I'm wired to do risk assessments and I see things a bit differently than some people.

I'm pretty sure you can do it all the way you think you can, and make it work; and if things start going south - play dumb and ignernt...

I'm not actually an expert in this, but I did stay at a Holiday Inn Express once... (actually my dad works for Canada Customs so I had good insights)

So basically, I'd just have the Canadian buyer (or you) call the border crossing you are planning to cross at and ask these questions about the paperwork and see how lenient they are to procedures.

Good Luck!