Door Lock Rod Clip - help finding replacement

[davidrepas]

Hello -

I'm unable to open my driver side door from the outside using the door handle. Basically, a small plastic part that connects the internal handle mechanism to a rod (which opens the door) has broken.

Here's a sketch of a similar part I found online (for Toyota/Lexus):



Any ideas on where I can get this part? Isuzu dealership wasn't much help, saying the part was either part of the handle kit, or a more expensive kit that includes the rod along with a bunch of other things.

Thanks!

[Y33TREKker]

St. Charles Isuzu
1-800-727-8066
Ask for Merlin

Isuzu part # for drivers door is 8-97037509
Isuzu part # for passenger door is 8-97037508

They don't cost alot, and from what I've seen it's a somewhat common occurence, so ordering a couple of each when getting a replacement might not be a bad idea...as long as you have somewhere in mind to keep them in the meantime that you'll be able to remember when it happens again.

[navistar]

For starters, go to:

http://www.myisuzuparts.com/thumbnail_view.php

Page through the illustrations on this site to find the part.

Then call Merlin in the parts department (talk just to him personally) at St. Charles Isuzu:

1-800-727-8066


Navi

[Solitude]

I got a help pack from the local checker auto parts/kragen/shucks store.. and the black one worked so far.. 4.99

[mdwyer]

Any ideas on where I can get this part? Isuzu dealership wasn't much help, saying the part was either part of the handle kit, or a more expensive kit that includes the rod along with a bunch of other things.

Find a new dealership. That's probably easier said than done, of course...

This part is a common weakness, and if the dealer had any clue what-so-ever, they would have known immediately what you wanted, and probably had a handful in stock. I've replaced mine once already, and I suspect there's a pretty large percentage of owners who have.

Use the info that Y33TREKker left you above, and call Merlin. Your dealer is useless.

[rowhard]

Also, you might want to take a look at the how to article I wrote on the subject. Pretty simple process. You might want to go ahead as I suggested and order the other side, chance are it will fail pretty soon too.

http://vehicross.info/modules.php?na...warticle&id=22

[davidrepas]

Wow! You guys are awesome - thanks for the info and advice.


Thanks,
David

[eli2extremevx]

I had same problem, a zip tie can be worked into there to hold it in place until replacement part comes in.

[mdwyer]

I had same problem, a zip tie can be worked into there to hold it in place until replacement part comes in.

...that's funny... when mine failed, I found a broken zip tie attached to it. Apparently, the previous owner thought the same.

[nfpgasmask]

So I am on with Phil about the clips. The part #s are actually:

Driver's Side: 897037509-0
Passenger's Side: 897037508-0

I guess they need that zero on the end. .88 cents each with our discount. I am ordering a couple spares.

All that said, I am still not 100% sure this is the right part, so I will report back when the parts arrive.

Bart

[nfpgasmask]

Got the parts yesterday. The above part numbers are what you want. I order an extra one for each side. Strange thing is, the driver's side ones are made from brown plastic and the passenger side ones are white plastic. But hey, they are correct!

Bart

[Jason]

I ran into this problem today and as always, I knew to come here for help. I found a Dorman brand Help! package at Advance Auto, part number 75450. The black clip did the job for me. Probably a similar or same package as Solitude used back in 2008. Probably an hour in labor total.

[Dean68]

Jason, do those parts still work? Do you know which color you used for Driver and which for Passenger sides?

Thanks

[Jason]

I only installed the drivers door clip. It still works fine. Don't recall the color but only one or two in the package are close. Just give them a try.

[Dean68]

That Advance Auto, part number 75450 did the trick. I had two clips that were broken. One was up at the top near the outside handle, the other at the very bottom. In the process of getting the one on at the bottom, I broke the upper clip of the lower rod. I ended up using two sizes overall and had to get a second package. If any fail, I predict it to be the top one near the handle because it just didnt seem to click into place quite as well as the others. Time will tell.

While I was in the door, I decided to investigate the problem with the window ha binding going up. I had always assumed I broke the plastic support at the bottom of the window. But it was fine. Now I just have to figure out how to fix the binding.