sorry im sure this is a silly question but when you check your oil do you pull the dipstick, wipe it clean and then check it again?
That does not sound good. You should be dumping around 4 quarts I would think. I know that when I change my oil, I use the same 5 quart jug for the used oil, and it almost always fills up...
Etl makes a good point, are you checking the oil properly? Also, try checking it in the morning after the VX has been sitting. If you only have a quart or so draining, that dipstick should come out pretty dry. Hopefully you don't have any sludge in there.
Bart
Good points. Can someone send what their dip stick looks like. So I can compare? Maybe mine is too long. It is always wet, AND deffinately did not show a low amount for only that to come out. I think there might be some blockage. Where you would I get a gasket? Is it a simple pull off, regasket, put back on prodedure or what should I need to clean it?
Thanks for the input. Im kinda of worried but the engine runs strong. Almost better than ever.
Hey, looking at your pix made me remember. The stripes on the intake, silver on the black and it looks like black on the blue, well, mine are coming off of the front. What do you think I could use to get them to stick back on????
D.W.
#0147
Take them all off and replace with some fresh tape.
-- John
John Eaton
Original Owner
2001 Proton Yellow #580
Atlanta GA
http://wildtoys.com/vehicross/
http://vehicross.blogspot.com/
"Metaphors be with you"
yep i just took mine off and re-taped them with masking tape, then painted the whole piece blue, then pulled the tape off, the best thing for you to do if u want them silver again is pull them off and handpaint some silver stripes on there