H3 Wheels

[Knivx]

Well they fit. Have yet to get tires on them. will probably end up being some cheap tires cuz i splurged on the wheels and i'd like to get some lift and a few other things need addressing. They fit on the hub and everything and has about an inch and a half clearance on the back to the upper arm which i assume is good. I've figured out that they are about a quarter inch wider on the inside so i doubt that will cause problems? Oh and my stock 18's say the have an offset of 38mm as well. Any other ideas or input that i may have over looked before i plunk down the money for tires?

[Knivx]

Oh yeah i forgot to mention that the hummer center caps don't fit. But they looked really good without them. Almost like a Rally car wheel or something. I'll try to show off some pics when i get the tires on and all settled out.

[ZEUS]

RIGHT ON! Did you try to steer to lock out while the wheel was mounted? You may have to adjust the lock out adjustment bolt to keep them from hitting the A-arm but I doubt it. It's too bad the center caps don't fit... but it sounds like an excuse to order some Aisin hubs!!

[Knivx]

I didn't try turning it since it didn't have a tire on and my buddy and i were just checking real quick and only had the vx up with a couple bottle jacks. Any reason the extra width would be a problem? I of course came from the 18's so i'm not too familiar with how a 16 fits on there in relation to clearances here and there. I'm hoping to go to a 265/75r16 but if thats gonna be more headaches than a t bar crank and some light trimming i might rethink that size, at least on these wheels for now. If i do have a problem with that little bit of width on the inside would wheel spacers be a way to go or maybe just suck it up and deal with a little more trouble than anticipated. Maybe i can go down to big o and have them mount me an old tire in that size to do a test fit with the tire.....

[JHarris1385]

I run that size but with a different offset.

[bigkoala1]

im surprised no one as done a photoshop of these wheels yet!!

[JHarris1385]

Or pictures have not been uploaded yet.