trany flush woes

[Francesco Rizzo]

wow, thanks for the quick replies! I will get under to check it out.. do I just remove filler bolt and poke finger in though?
I did notice a slow shift from 3rd to 4th before I brought it in; so when the service guy said my clutch was going because of slow shifts, I believed him. He continued saying I would need to replace my enitre tranny since these tranny's can't be opened up and worked on.. only swapped out. anyway, Thanks again

oh and yeah I'm in orlando doing what I do best.. working insaine overtime for airtran

[Ldub]

[nfpgasmask]

wow, thanks for the quick replies! I will get under to check it out.. do I just remove filler bolt and poke finger in though?
I did notice a slow shift from 3rd to 4th before I brought it in; so when the service guy said my clutch was going because of slow shifts, I believed him. He continued saying I would need to replace my enitre tranny since these tranny's can't be opened up and worked on.. only swapped out. anyway, Thanks again

oh and yeah I'm in orlando doing what I do best.. working insaine overtime for airtran

Somewhere on here is a scan from the manual about how to check the level, just do a search, but in a nut shell:

1) Park the VX on level ground
2) Start the engine and let it idle for a bit
3) Gen in the driver's seat and slowly shift through all the gears, from PARK all the way down and back again. Leave VX running and in PARK.
4) Crawl under the VX (yes, while the engine is still running)
and open the fill port (have a catch pan ready)
5) If fluid dribbles out, you should be full. If nothing comes out, add fluid until it dribbles out (and yes, while the engine is still running)

Its not fun, its messy and hot (especially in FLA) but not that hard. Use one of those funnels with a lid attached to some clear tubing from Wal*mart, works great for filling the tranny, but you need 2 people and some extra tubing to reach all the way.

We (Reno VXers) just did ours and my VX is shifting smoothly again.

Bart

EDIT: See, I knew Dub would beat me too it.

[nfpgasmask]

And oh yea, probably should mention, if you need to add fluid try to add the same stuff the shop did, I would think mixing (esp synth and regular) might cause issues???

Bart

[Chopper]

When you open the check hole, it usually runs out pretty freely (maybe a half pint) a flush machine usually puts it back in under some pressure. Glad you're still around We need to get together out your way this spring or summer....maybe out at Kermit Weeks' place....Joe is right there, and we three have aeroplanes in common, I'll see what he has going on out there this year. Wayne

[Francesco Rizzo]

wow.. nothing.. maybe like a a lil drizzle or like it was spitting a few drops.. nothing significant though.. I called and explained how I checked it. The guy told me to bring it in but I do not want to drive it.. too risky to drive about 10 miles?

[Ldub]

Follow the instructions...find out what's in there, get a pump that fits a quart bottle at the auto parts store where you get the ATF & fill it up.

Then print out the instructions & bring em' with you, so your so called "mechanic" knows how to check fluid level.

It's the whole give a man a fish, teach a man to fish thing...

[LittleBeast]

Sounds like the exact thing that happened to me..... Do some searchs or just know that you need to get this taken care of or save up $4K for the rebuild

[Francesco Rizzo]

I guess forget the delaership, I'm gonna go buys some vexron vi and thorw a quart or 2 in there. I read all over the interent that it's backwards compat since the dexron iii is going no longer going to be produced. I will double check with the usermanual, but just wanted to say thanks for the input.

[nfpgasmask]

I guess forget the delaership, I'm gonna go buys some vexron vi and thorw a quart or 2 in there. I read all over the interent that it's backwards compat since the dexron iii is going no longer going to be produced. I will double check with the usermanual, but just wanted to say thanks for the input.

Yeah, the pump method Ldub was talking about works, but it can get really messy and frustrating. If you have a helper, the funnel method works like a charm. If you go to Wal*mart look near the trans fluid, you should find a funnel thing that has a lid and a tube attached. Buy that, plus some extra clear tubing from Home Depot (I think 3/4" is the size, iirc) and cut about 4 feet of that, and connect it to the funnel. You need a helper, but this way you can syphon the fluid right up through the fill port with little mess and no dreaded up-side-down, inverted, under the running, hot VX hand pumping.

Bart