Autopia Lighting Xenon White Fog Light Kit

[Pepino]

Has anyone bought these fog lights? im thinking about getting them but dont know how hard are they to install or if i will have to take them to a shop to get them installed any opinions?

[Ldub]

Has anyone bought these fog lights? im thinking about getting them but dont know how hard are they to install or if i will have to take them to a shop to get them installed any opinions?

Maybe post a link so we can see what you're talking about?

[Pepino]

here is the link sorry!
http://cgi.ebay.com/ebaymotors/ISUZU...em180210533460

[Ldub]

If you do get them, you'll need to search the forums for Scotts(Moncha) write up on how he installed his Hella Micros.
The same method of bracket modification could be used with these.

[MSHardeman]

Pepino,

I installed some similar lights a while ago, but of course I didn't take any pictures. I fabricated some brackets out of some aluminum flat bar that I bent into a "U" shape, painted black, and bolted to the top of the turn signal housing like Moncha outlines in his Hella install. The lights I installed had an "angel eye" ring and to get them to fit in correctly I had to cut the lip that the stock running lights seat into out. It was really a pretty easy install. If you need me to I might be able to get some pictures of the whole set up.

[BeeVenom]

Pepino,
I purchased from autopia since their advertisement stated they were for the VX. Unfortunately, when they arrived they turned out to be too big for the original holes in the front bumper cover. I don't want to do any cutting since i want to keep everything as it came from the factory.
I did contact them and they did an exchage for 2.75-inch units with no additional charges other than my cost to return the other ones. I have not tried to install yet, but will do soon.
If you get any, get the 2.75" units since they are the smallest ones they make and i'm pretty sure they should work OK.
I can let you know how it goes,
Scott

[Dumke]

Pepino,

I installed some similar lights a while ago, but of course I didn't take any pictures. I fabricated some brackets out of some aluminum flat bar that I bent into a "U" shape, painted black, and bolted to the top of the turn signal housing like Moncha outlines in his Hella install. The lights I installed had an "angel eye" ring and to get them to fit in correctly I had to cut the lip that the stock running lights seat into out. It was really a pretty easy install. If you need me to I might be able to get some pictures of the whole set up.

Any chance you could take some pictures of the outcome. I know there was another with angel eye lights and was thinking of same. Either post a picture or two on your profile or on your other post which is found here:

http://www.vehicross.info/forums/sho...ight=angel+eye


... Thanks

[etlsport]

Right now im in Spring City and use 113 through Trappe and then cut through evansburg to get to work every day. I just bought a house (with garage!) at the border of Audubon and Norristown on Trooper rd, so ill be moving in within the next month hopefully