Hood Scoop

[Vehi-Cross-Az]

I think I can get this one still, but its real CF
and not too cheap



that one is a true bolt on.

There are two other style scoops we can get too, but only in paintable
and or CF looking material.
Both are installed with 3m double sided tape but work well and look
pretty cool.

[Chopper]

I think John has one of the CF inserts that were made a few years ago by "CF1"(long gone) . Two versions...with scoop, and without, and not many of either were made.

[gexxo18]

What are the two other styles of scoops? Will the tape actually hold it on? And where do you get these?

Thanks!

[johnnyapollo]

Mine is actually molded into the CF hood insert and is indeed a CF1 design - I think only about a dozen were made, along with a couple of hoods before they bailed. I got this one from a previous owner who had removed it before selling his VX - I think I paid around $200 plus shipping for it. It's not holding up great - small stress cracks along the bottom edges of the scoop plus one corner, probably from being dropped. I'll probably end up painting it when it gets to far along (shame) but most of this exposed CF starts to yellow and crack as it ages (the resins aren't very hardy when exposed to UV).

I've actually owned this for a while off the VX - wanted to have the SC installed to justify the look (even if it's non-functional).

-- John

[Chopper]

Mine is actually molded into the CF hood insert and is indeed a CF1 design - I think only about a dozen were made, along with a couple of hoods before they bailed. I got this one from a previous owner who had removed it before selling his VX - I think I paid around $200 plus shipping for it. It's not holding up great - small stress cracks along the bottom edges of the scoop plus one corner, probably from being dropped. I'll probably end up painting it when it gets to far along (shame) but most of this exposed CF starts to yellow and crack as it ages (the resins aren't very hardy when exposed to UV).

I've actually owned this for a while off the VX - wanted to have the SC installed to justify the look (even if it's non-functional).

-- John

at least it cools a bit....stick on vents, scoops and such, always seem very Mustang....tacky

[WILLY]

Mine is a stick on from jc whitney and has held up for over 2 years.

[So-CalVX]

i want a hood scooped in sert as well... would prefer it not to be carbon fiber though... i like a nice smooth clean look so a stick on or bolt on is out of the question... i know they are hard to come by... but it never hurts to throw it out there and ask if anyone knows where i can get one.
(mine would be functionalized BTW)