Foggy headlight fix.

[Rene M]

To be honest i just did mine which were much worse than the ones in these pictures.
I used a high speed buffer and 3M part# 05933 perfect-it #3
it is a very fine cutting compound to buff paint.
1) put on a thin coat and use the buffer carefully on the light fixture for a few min.
2) wipe it all off to inspect the spots you missed, then do it again to finish it again.
3) use a good wax like Zmyol to seal the plastic or the problem will return rather quickly.

[Chopper]

Man, at work we sand some of he real bad ones down pretty good with a D.A.(800gt) , then wet sand 'em with 2000...then 3000 D.A. coarse cut compound, and a buffer( perfect it silver label)....Then clear them and stick 'em back in

[Dare2Dream]

Sorry, what's a DA? I'd like to try out your technique

[Solitude]

an orbital sander that runs on air.. bouts 7 inches in diameter

[johnnyapollo]

DA = Dual Action - supposed to produce less "swirl" marks.

-- John