A new VX owner has Wheel ?'s

[grantCO]

Thanks for this board. It has a ton of info and helpful info. Thanks.

I am stuck in a horrible deal due to the fact that the dealer I bought the vehicross from was using 2.5" wheel spacers and 17" GMC wheels on the VX. The offset is perfect but the wheels wont clear the 108mm hubs the VX has hence the spacers. I am looking at a set of eagle alloys with the following specs

Rim Size 17x8 Bolt 6x5.5
Offset: -4 mm Backspace: 4.25 inch

Will these tuck into the wheel wells better? I am lifted with OME 912's and a tb crank. With my current wheels I can only run a 245/65/17 without rubbing issues. This is the same as stock size. I want to run a Nitto Terra 265/70/ 17.

Any help would be awesome thanks

[biju]

Grant,

This sounds like bimati's VX. Where did you buy this VX?

-biju.

[grantCO]

I bought it at Denver Isuzu. In July. It has a bad noise do you board members know anyhting about the history of my VX? Also any wheel help?

[Y33TREKker]

Check out this link.

http://www.1010tires.com/tech.asp

It has a wheel and tire tech section including calculators for both tire size and wheel offset.

[grantCO]

Check out this link.

http://www.1010tires.com/tech.asp

It has a wheel and tire tech section including calculators for both tire size and wheel offset.

Thanks for the link. I have been to the 1010tires link. It looks like these will stick out further than stock. The issue I have is I have no idea what stock offset looks like. I have some 17x7.5" GMC wheels with 2.5"spacers so I think my wheels stick out closer to 4" further than stock. Would this set of wheels I am looking at clear 265/70/17's with my 3 " lift. I dont want rubbing issues. Thanks for the continued help.

[Joe_Black]

Have you considered having a machine shop bore the centers for clearance?

[Ldub]

I bought it at Denver Isuzu. In July. It has a bad noise do you board members know anyhting about the history of my VX? Also any wheel help?

Do yourself a favor & get to know the forums search function...find all posts by bimati for further info on your ride. Also search tires & wheels for a real education.

[JHarris1385]

You should be fine with that set up. I have 4.5 backspacing running 265-75-16

[grantCO]

Do yourself a favor & get to know the forums search function...find all posts by bimati for further info on your ride. Also search tires & wheels for a real education.

Thanks I have. Denver Isuzu replaced both CV's, ball joints, and some other little thing in the front end. I have been serching "tires & wheels" I am just checking to get a 100% good point of view before I plop down 500.00 plus on some new rims. Thanks

[biju]

I bought it at Denver Isuzu. In July. It has a bad noise do you board members know anyhting about the history of my VX? Also any wheel help?

Hmmm... I wonder if Bimati (Jeff) sold/traded his VX. He had a 99 silver w/ GMC wheels and spacers... that would explain why we haven't seen him online for a while...

-biju.

.

[CrnCnn]

Hmmm... I wonder if Bimati (Jeff) sold/traded his VX. He had a 99 silver w/ GMC wheels and spacers... that would explain why we haven't seen him online for a while...

-biju.

.

I am certain he traded it in on a Suzuki or something.

[Knigh7s]

yeah Bim's profile states "99 Astral 0210" so that would be his VX.

[grantCO]

Hmmm... I wonder if Bimati (Jeff) sold/traded his VX. He had a 99 silver w/ GMC wheels and spacers... that would explain why we haven't seen him online for a while...

-biju.

.

He did the photo in his profile is My new VX and His Old VX. Its funny I wish I would have knew he sold the rear headrests. I am having a hard time finding new ones.

[KaNGiX]

If there black and red, head rest i have em. Actually i have the whole rear seat removed. WIll prolly never be used again,

[Chopper]

Yeah, we haven't heard from Bim in a while, now that you mention it. Seems he would've said goodbye. Maybe was avoiding flak he thought he'd get? Still......