Results 1 to 6 of 6

Thread: Group EGR Question

  1. #1
    Member Since
    Nov 2002
    Location
    1999 Victory White 0474; 2001 Ebony 0377
    Posts
    2,788
    Thanked: 0

    Question Group EGR Question

    I'm just curious as to how many here have eliminated their EGR setup? If you have, please post and share your solutions for the block-off and signal replication.

    Thanks!
    Over 20 years of Isuzu enjoyment...

  2. #2
    Member Since
    Nov 2002
    Location
    1999 Victory White 0474; 2001 Ebony 0377
    Posts
    2,788
    Thanked: 0
    Sooo... No one has eliminated the EGR?

  3. #3
    Member Since
    Feb 2006
    Location
    2001,FOX FIRE RED MICA,0251
    Posts
    326
    Thanked: 0
    Is it possible? cause i would do it if i could.

  4. #4
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2
    Yeah, I wonder how it would affect things like my burning oil problem....

    So Joe, please lay upon us your knowledge about the EGR, what it does, and why we don't need it.

    Bart

  5. #5
    Member Since
    Nov 2002
    Location
    1999 Victory White 0474; 2001 Ebony 0377
    Posts
    2,788
    Thanked: 0
    Here's a pretty decent wiki entry on the EGR: http://en.wikipedia.org/wiki/Egr

    Removing it is fairly simple with the exception of the sensor, which in my opinion is best to properly wire with a bypass to "fool" the ECU into thinking it's operating normally. These are commercially available for a number of vehicles, but for the VX we'll need to divine what will cross to it or how to make one custom. They're not really complicated, usually just a resistor or capacitor to simulate the sensor signal, but often critical to keeping the CEL off and in some cases proper engine management.
    Last edited by Joe_Black : 11/21/2007 at 02:50 PM

  6. #6
    the supercharger i recieved for my VX was designed to be used w/o the EGR. supposedly made more power w/o it. but i was never able to get the CEL to go off. i finally just cut the wire. there are five or six wires that go in/out of the EGR. i wasnt able to rig up any resistors to fool it. it seemed easy in theory, but it seems there are a ton of ways the the egr can throw a CEL and i wasnt couldnt come up with a way to fool it. it seemed pretty complicated. i would love it if someone could come up with a way though.

Similar Threads

  1. Facebook group
    By mindaugas in forum VX Talk...
    Replies: 12
    Last Post: 01/26/2011, 06:52 PM
  2. Group Buying a VX
    By vt_maverick in forum VX Talk...
    Replies: 23
    Last Post: 11/18/2010, 06:17 PM
  3. Synthetic Group 4 Oils
    By BeeVenom in forum General Tips...
    Replies: 21
    Last Post: 03/02/2008, 04:56 PM
  4. Hello Group lifting question.
    By WiSDoM in forum VX Modifications...
    Replies: 1
    Last Post: 04/21/2006, 08:29 PM
  5. New to the group, several questions
    By Medman in forum VX Talk...
    Replies: 4
    Last Post: 05/06/2003, 05:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails