Blower motor going out

[Joe_Black]

I've never fiddled with the resistor, but if you take a look under your dash behind the glove box you'll be looking right at the blower motor. It's held in place with 4 phillips screws and has a captive plug for the power connection. To exchange with a replacement simply squeeze the plug while pulling to remove, then unscrew the four screws with a hand on the blower assembly to keep it from falling on you. Once out you'll see how simple it is, replacement is reverse of above.

[IndianaVX]

just to add info on this topic....
when my resistor went out, i only had one speed on the blower (about medium speed), you could turn the knob, push buttons, and the speed was the same. the blower worked fine. if your problem is similar, then i would be suspect of the resistor. again,VERY easy to fix.
let me know if you need help.