So the meter isn't showing anything? That's really bizarre - I've never heard of a lack of signal at the OBDII connector - were you hooking it up or someone there? Are you sure they hooked into the right connector?
-- John
Super VXer
So the meter isn't showing anything? That's really bizarre - I've never heard of a lack of signal at the OBDII connector - were you hooking it up or someone there? Are you sure they hooked into the right connector?
-- John
John Eaton
Original Owner
2001 Proton Yellow #580
Atlanta GA
http://wildtoys.com/vehicross/
http://vehicross.blogspot.com/
"Metaphors be with you"
Super VXer
I would try a different store just to verify if their equipment was functioning properly.
Sorry, but after that I may be at a loss.
Super VXer
I watched him hook it up. It seems unlikely that the plug would not have any electric to test the codes. I will try another auto store.
Super VXer
check the fuse for your horn.. sounds crazy.. but when i installed my air horn my scangauge stopped working.. turns out i had my wires crossed and i blew the horn fuse... replacing the fuse made my scangauge work again... turns out the data port is powered through that fuse... fuse is located in the engine bay fuse box
Last edited by etlsport : 10/31/2007 at 07:10 PM
"Engineers believe if it ain't broke, it doesn't have enough features yet"
Super VXer
The horn fuse might be the problem, I took the horn fuse out a few weeks ago because my alarm system was going off in the middle of the night for no reason. Have not diagnosed that problem yet. I will put the fuse back in and take to get checked. Thanks for the help.
Posting Permissions
Reply With Quote