Quote Originally Posted by Dino
I pulled the Idle Air Control Valve on mine, cleaned the crusty gunk off from it, gave it a small shot of PB Blaster, reinstalled it and no idle problems since.
Good idea there, Dino. I pulled mine after 160K miles and it was very dirty. It's on the upper left side of the throttle body when facing the engine. The manual says don't immerse the valve in solvent and don't apply so much pressure to the pintle that it moves. Just spray the pintle and spring with carb cleaner and use a tooth brush. Also clean out the area where the valve sits.

Another easy cleaning job to keep everything running right.

Mark