That is correct. They sell over here on ebay for around $300 US all the time. The only problem is the fitting, which in the alpine kit is done for you. I was seriously thinking about one of them, but I have had the hardest time trying to find an old intake manifold to chop up and modify to mount it on. My VX is a daily driver, so taking my intake on and off repeatedly while I hack on it really isn't an option at this point. Also if you are interested in going the eaton m62 route, I suggest looking into the newer, rarer mp62 which looks like it would mount up a little easier. It costs slightly more since you probably aren't going to find a rebuilt, but they are supposedly better. I think there was a writeup on here on installing the Alpine kit which, if you were going to do a DIY job would be a good resource to start with since it has tons of pictures and you can see where it could get potentially dicey. Good luck!!