door window change

[bigkoala1]

Its pretty easy-

-remove the hardware on the inside of the door
-pop off the door panel (be careful of the plastic snaps)
-lift the plastic moisture barrier to get access in the door (make it so that you can seal it back up again)
-unbolt the old window hardware (2 bolts)
-install the new one
-test to make sure its aligned correctly before tightening down bolts
-reassemble

LUBE the channels- and re-lube every 2-3 months, more often if in wet region of country.

Should take 2 hours for a first-timer.

creeg, what do you use to lube the channels?