HID Headlight Problem, Please HELP

[tysamigo]

One of my father's friends fixed the hood release and I never had a chance yet to ask him what he did.

Now on to the Xenonrider, I just got finished installing the kit. Each headlight harness on the VX has a 3 prong connection. On this Xenonrider kit it only has 1 connection. The instructions says:

Step 7: Connect the 3-pin socket on the wiring harness to ONE of the headlight sockets. Please note: Some vehicles are positive-switched and some are ground-switched. You may need to switch some of the pins around if the standard pin configuration does not work.

So when facing the truck from head on, the left side (passenger) is the side in which the 3 prong connector is connected. The other side (driver) is not connected to anything. When I first turned on the lights they both worked and were BEAUTIFUL. In about 3-5 seconds the left side (passenger) went out, no light. The fuses are of course OK and I have not started to switch the ballasts because I think this unconnected 3 prong may have something to do with the problem.

Littlebeast, how did you connect yours? What am I missing?

I'll also give Joseph a call in a few moments but wanted to know from someone who has a known working system how the connections were made.

Also note for those considering this mod, the instructions I spoke of are easy to read (the 1 page sheet) however when it comes to the actual installation manual (a small booklet), it sucks. The wording is in broken english as if someone translated it and did a very very very poor job. Nontheless one can mumble through it and use the diagrams to connect it.

Littlebeast????

[tysamigo]

OK GREAT NEWS!!!

THEY WORK!!!!

As soon as I left the computer I called Joseph and he answered immediately (it's 7:18pm EST). It sounded like the call was forwarded to his cell phone, even more impressive that he answered. He said to ensure the ground was not on a painted metal surface and to sand the area to ensure it's metal to metal contact (duh, even though I didn't originally do this). I did this and the same problem happened, the passenger side turned off in 5 or so seconds. My next step was to swap out the ballasts and so I did. Once I did this the darn things work!! I'm guessing (along with Joseph's advice) that nothing is wrong with the ballasts, but that I had a bad connection to the ballast.

He (and the instructions) suggest to run them for 15 min or so for the first time. They have been running for 20 min and NO PROBLEMS!! HOOOORAY!!

I ordered the 10k which is 1 step away from the most bluest color. I LOVE THEM, but the true test will be when nightfall comes. That will be the final test. I'll post back my experience, but so far soooooo goooood

KUDOS to Joseph's great and fast customer service!!

[tysamigo]

I've had an opportunity now to drive with the new Xenonriders (10k) for a few hours now. All I can say is WOW

They are beautiful! The 10ks are a bit more blue than the previous HID set but I love them. If I wasn't satisfied with the color I could have swapped them out (no charge) but I'm definitely sold on these.

The ballast in this kit is smaller than the other kit and so I thought maybe they won't be as bright and brilliant because the other kit was AWESOME (for the 2 months of operation). No problem, these are just as bright, just a bit more blue tint than before. If I remember correctly Joseph said these were about 2500 lumens, a technical spec I could not retrieve from the other kit's retail package. When driving you can see the reflective tape around the stop sign aaaaaall tha way down at the end of the road along with the reflective paint on both sides of the road and inner lanes. The lights bring out so much more visibility that it's actually such a more safer environment to drive in. I can't brag enough . . . however . . . it's still to be determined (although others have had success) if these will be troublefree.

As always, I'll keep you all posted but for now we are all good

[MSHardeman]

Ty,

Can you take a quick photo of the install? I'm really interested in the head light assemblies themselves. Do you have to get rid of the little reflector in front of the halogen bulb, or is this truely a "plug and play" installation?

Thanks for the info, and thanks for keeping us up to date.

Mark

[LittleBeast]

Ty,

Can you take a quick photo of the install? I'm really interested in the head light assemblies themselves. Do you have to get rid of the little reflector in front of the halogen bulb, or is this truely a "plug and play" installation?

Thanks for the info, and thanks for keeping us up to date.

Mark

Plug and play. The little reflector works perfectly with these bulbs. The easiest way to do this is to take everything apart including the rubber boot and see what you are dealing with. Practice putting on and off the connector ring on your stock headlights to see how it correctly clips them in there. Then try with the HIDs. Really is easy as cake just takes a few tries to get the hang of it. Seriously though if you have changed your lights before you can do this, just runs a couple of extra wires.

Ty, if you don't put some photos up maybe I can when I get the VX back from Aamco. Ty, glad everything worked out for you. I ran the ground directly back to the battery, and I did not have to modify the connection at all, however on the Mustang and Pathfinder, I had to switch around the connection plugs until the hi were hi and low were low. Glad you got that little bug figured out. Sometimes on those connections you have to sightly bend the metal part to make good contact, but be careful and make sure no power is going to anything.

[rowhard]

Wow, I guess he offer's us a discount. I just placed my order and was excited, and after the price quote am smiling ear to ear. Thank's LittleBeast.

[LittleBeast]

Wow, I guess he offer's us a discount. I just placed my order and was excited, and after the price quote am smiling ear to ear. Thank's LittleBeast.

No problem, hope they work out as good as mine have been