Fuel Pressure Regulator Replacement

[Dino]

Since you went through all that trouble you might want to replace your fuel filter also. It is probably more important to do than the FPR!

Good point...

[JHarris1385]

I had HUGE improvements from replacing my FPR. Great starts, better mpg, more response. I would reccomend this to everyone.

[Ldub]

Nice write up, you should be working for one of the repair manual publishers.

Was there much particulate matter in the FPR screen upon dis-assembly ?

[Dino]

No beacuse there was a HOLE in it!!

[Chopper]

Nice write-up. the tips to cut the hex key, and replace the bolt were particularly nice touches, that a do-it-yourselfer would have struggled with. A trip to the Snap-on truck (or Sears) will get you a "Gearwrench" brand ratchet box wrench, with 50 or 60 assorted bits (hex, torx, security torx, square drive etc.etc.) for just such situations....about 45 bucks at Sears. One of those tools you can't do without once you use it. Wayne

[ZEUS]

The words are in the pics. That way, I don't have to hear myself talk.

HAHA! Nice... you just need to make a few more write-ups like this and you might pass the credibility test!

[VehiGAZ]

Thanks for this thread Dino! Very helpful - I will be doing this myself fairly soon.