Results 1 to 15 of 31

Thread: clicking during turning

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    oh i hope i hope its tie rods!! ive been looking for an excuse to get HD tie rods from indy 4x... not really sure why tie rods would click? but oh man i would love if that was my problem... i was also thinking i wonder if it has somethin to do with my diffs.. cause its been stupid hot recently so ill have to check all my fluid levels, its been about 5k miles since i checked them so might as well... oh how i hope its not my CVs... as much as i like workin on my vx i cant help but dread tearing everything down based on what ive heard about cv replacement


    "Engineers believe if it ain't broke, it doesn't have enough features yet"

  2. #2
    Member Since
    Jun 2002
    Location
    1999, Ebony, VX, #1679
    Posts
    8,422
    Thanked: 3
    As far as I know tie rods and sway bars will not cause a clicking noise. You may also want to check and see if there is anything hitting the tire in the wheel well or maybe the cladding. It may only rub at certain times in the turn. You could have "re-aligned" you cladding while off roading.
    Billy Oliver
    15xIronman
    My Sponsors:
    Accelerate3Coaching
    TriSports.com (PM me for 1 time use 20% off code)

  3. #3
    Member Since
    Jun 2002
    Location
    2001Firefox mica redVX 0834
    Posts
    195
    Thanked: 0

    clicking

    I notice on my VX when I accelerate quickly I get a clicking noise but I don't think it's continueous. You guys think it's the CV joints starting to go I noticed it after installing the larger tires

    Andy
    Andy C
    01 Firefox VX
    CT

  4. #4
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    ETL - Sorry Son but it sounds like the outer CVs to me. PM me if you need help with any of it - I do still have the spare set but haven't gotten them rebuilt yet (they "borrowed" parts from them for my rebuild).

    Andy - Inner CVs make noise when decelerating. Outers make noise while in turns (someone correct me if I'm wrong with these statements). Clicking under hard acceleration may be Universal Joints but I'm not sure.

  5. #5
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2

    Question

    Hmmm, I wonder about this also. Mine is clicking when I back up slowly with the wheels cut to the left. I hear a single "pop" and that's it. And it does not do it every time. I'm not sure what it is. I do not think it is my CVs and it drives fine in all other respects. The sound seems to be coming from the right side, just BEHIND the front right wheel....

    Does this sound like a similar symptom?

    Bart

  6. #6
    Member Since
    Feb 2006
    Location
    2001,Kaiser Silver, VX, 0563
    Posts
    4,767
    Thanked: 0
    when i listened to mine from outside the car it didnt really sound like it was coming from the wheel area to me.. i actually started to wonder if it had to do with my skid plates.. thinking about it more though i wonder if it could be wheel bearings, i went through ALOT of water over that weekend maybe it washed some grease out of the bearings? or trapped mud particles in them... i keep leaning away from CVs a. because i dont wanna replace them lol and b. because the boots look like they are in great shape..

    tom i have a 2 week break coming up after next week so if i havent figured out this problem by then ill have plenty of time to get the vx up in the air and tearing down the CVs i guess.. and ill probably be sending you a few messages, ive already printed out triathlete's instructions for how to replace cv boots just in case i need to take it apart

  7. #7
    Member Since
    Jun 2002
    Location
    1999, ASTRAL
    Posts
    734
    Thanked: 0

    Ignore it...

    My Trooper made that noise and my VX makes that noise also. Mine clicks on slow left hand turns while parking. No ill effects on my VX, and I have near 80k on the ODO and have heard it for the past 55k.
    NAVIGATOR

  8. #8
    Member Since
    Jun 2002
    Location
    2001Firefox mica redVX 0834
    Posts
    195
    Thanked: 0
    Quote Originally Posted by tom4bren
    Andy - Inner CVs make noise when decelerating. Outers make noise while in turns (someone correct me if I'm wrong with these statements). Clicking under hard acceleration may be Universal Joints but I'm not sure.
    Sounds like my CV axles are fine and I don't think it's the universal joints.
    I might have to take a closer look ti figure it out. My mileage is at 40K now.


    Andy

Similar Threads

  1. Clicking sound???
    By ironmikevx in forum VX Troubleshooting...
    Replies: 3
    Last Post: 05/29/2015, 02:56 PM
  2. clicking sound
    By WiSDoM in forum VX Troubleshooting...
    Replies: 15
    Last Post: 12/15/2007, 10:53 PM
  3. Clicking when braking
    By spitfire5454 in forum VX Talk...
    Replies: 3
    Last Post: 09/30/2004, 02:09 PM
  4. Clicking noise?
    By Cyrk in forum VX Talk...
    Replies: 13
    Last Post: 03/24/2004, 09:08 AM
  5. Relay keeps clicking and will not stop.
    By loco6464 in forum VX Troubleshooting...
    Replies: 5
    Last Post: 09/25/2003, 06:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails