Cross Drilled or Slotted Rotors??

[Cyrk]

I used G2 and now it is starting to peel...

[Kenny]

SP Performance cross drilled and slotted. With EBC green brake pads.

I would strongly suggest you get your discs with a nickel plating coating or such. I got mine with just the shipping coating that wears off after a bit, so then I have to paint them to keep them from showing rust at the edges and in the grooves.

The EBC pads I use are "stickier" than the stock, but give a tad more dust. It takes a week to build up a layer than you can see. I'd recommend stock from Merlin, they're only a tad more than EBC.



BTW, I don't really see the benefit for "high temp" paint on our calipers. I used Tremclad primer and then fire red enamel (3 coats).
With a good cleaning, they still look like the day I painted them 2 years ago - no flaking or adverse effects from braking heat (they even stood up to a bit of brake fluid)