Switches

[nfpgasmask]

Cool Mark,

So do you think something like this would work?

eBay

Thanks - Bart

Bart,

I recently finished replacing my round running lights with some angel eye fog lights, and installed the factory Isuzu switch. The switch was a little loose, but with a little shimmin' it fits just fine. The text on the switch lights up, and there is an indicator light to let you know when the lights are on. I don't know if you could sand the text off as it does light up from behind so the text is cut out of the black plastic of the switch. I went to a u-pull-it yard with the switch in hand and yanked a wiring harness out of a Passport. The harness was missing a wire, but it was easy enough to rig one in and it fits the switch like a glove.

Let me know if you want some pictures, and I can dive into my dash this weekend.

Mark

[MSHardeman]

Bart,

I would think that if you are going to run lights you would need to get the fog light switch. I'm not that electrically savy, but just looking at the back of all of the switches they are all very different. The plugs are all different shapes and sizes, and they have different numbers of wires running out of the back of them. I guess most switches are just on/off affairs so I suppose that you could rig a cruise control switch to work the lights.

Like I said before, though, the wording (in this case "Cruise Control") looks like it is silk screened onto the face of the switch and it doesn't look like you could sand it out and put something else in it's place. I have my VX and my camera with me at work today, so I can snap a couple of picture of the face of the switch if you would like, but you would have to wait until this weekend before I can pull the dash to get to the back of the switch (I may be able to jimmy it out from the front if you really need to see the back of the switch today).

Good luck with the install.

Mark

[nfpgasmask]

Cool man, I will see if I can locate some fog light switches.

Thanks,
Bart

Bart,

I would think that if you are going to run lights you would need to get the fog light switch. I'm not that electrically savy, but just looking at the back of all of the switches they are all very different. The plugs are all different shapes and sizes, and they have different numbers of wires running out of the back of them. I guess most switches are just on/off affairs so I suppose that you could rig a cruise control switch to work the lights.

Like I said before, though, the wording (in this case "Cruise Control") looks like it is silk screened onto the face of the switch and it doesn't look like you could sand it out and put something else in it's place. I have my VX and my camera with me at work today, so I can snap a couple of picture of the face of the switch if you would like, but you would have to wait until this weekend before I can pull the dash to get to the back of the switch (I may be able to jimmy it out from the front if you really need to see the back of the switch today).

Good luck with the install.

Mark