Back Panel removal?

[VXNIT]

Need to replace rear speaker, anyone have pic of passenger side back of panel so I can pinpoint clip locations for safe removal? If anyone can assit with pick of there panel back when removed would be so appreciated. Thanks

[etlsport]

there are a few more pics in my gallery under the "rear speaker" album

tips for removing the rear panels

be patient.. they are not fun at all to put back on

do it when its warm out, the warmer the clips, the less likely they are to break

be careful with the top clip under the seat belt, i broke it on mine by pulling too hard when it was stuck

get an interior panel clip remover! itll make things much easier

[MZ-N10]

u have to remove the front door sides first, slide the panel toward the front door (be sure to undo the seatbelts and the little handle in the back). the just pull. its alittle scary at first but once u get a few clips off ull get use to the popping....if theres any clips left on the body and not on the panel use a popper tool.

[Dino]

u have to remove the front door sides first, slide the panel toward the front door (be sure to undo the seatbelts and the little handle in the back). the just pull. its alittle scary at first but once u get a few clips off ull get use to the popping....if theres any clips left on the body and not on the panel use a popper tool.

Popper tool..

[VXNIT]

Does rear seat have to be romoved to remove rear panel ?????

[etlsport]

it doesnt HAVE to be i dont think.. but it will make things infinitely easier if you remove it.. very simple to remove and reinstall.. just 4 bolts, with a helper it will take you 20 minutes tops.. hardest part it getting the 14mm bolts out because they are threadlocked so you will need a breaker bar probably