Permanent Fix for the plastic window tabs

[Vendetta]

I don't think I've seen that one, SlowPro. I've only seen the ones that holds the rear side down. I'm give the SBCs a try - eventually - and see how that goes.

Hopefully I won't be a 10%er.

-V

[SlowPro48]

Yeah there's not really a proper write-up on that one. I remember describing the fix but it didn't have it's own thread. I'm sure it's buried in the middle of a long ago threadjack somewhere. I provided the length of the bungee so I guess when it comes time to do the driver's side again I'll be using the search function as it took some experimenting to get the length right. Too long and you don't get enough lift, too short and the motor strains to get the window all the way down. Anyway since it was just going to be a temporary measure until I could get time to figure out how to move the lift point forward, I didn't bother taking pics and doing a writeup. I'll take some this time around though.

Hope the SBCs work for you. They definitely look stronger than stock!

[Ldub]

Here's the other one...http://www.vehicross.info/forums/sho...=bungee+window

And here's the one SlowPro posted...http://www.vehicross.info/forums/sho...63&postcount=9

Found in this thread...http://www.vehicross.info/forums/sho...=bungee+window

Which has a lot of useful looking links.