Man, just do it. The bearings and seals are around $70-90 from St. Charles. I don't remember offhand and that is for both sides. You'll also want to remember to order the snap rings that go in there. Tools you'll need are snap ring pliers, a fish scale for doing the outer retention rings and possibly a bearing press of some kind, all of which can be had cheaply. Plus the regular metric toolset for the VX. Not including the diff. oil you should be able to get this done for around $100 and a weekend(give or take). Just be careful in the areas already mentioned and you'll be fine. If you do plan on doing this just send me a PM and I'll give you and in depth run down in all it's gory detail. Plus you can talk smack to everyone who hasn't torn apart the front end of their vehicle before and call them little sissy nancy girls.