thats a snorkil ok i removed the air filter box and replaced it with a apollo rc5051as cold air intake k&n filter and got the longer hose and piped it up the wing and drilled a 3" hole in the wing and connected it to a pipe of the same internial dia and if you pull back the rubber at the top of the door/corner of winscreen you will find a handy star screw cut up a old motercycle tube about 2"width and screw it on then tuck the pipe through the rubber. silicone all the joints as you go along, still looking for a sutible head for the top but just use a cut piece off the pipe that comes with the k&n filter sounds good aswell just at ear level when driving down the street the k&n filter does up to 250bhp mines the 3.2 litre v6 probaly only 175bhp, in northern Ireland we have had lots of rain and the rivers are well flooded.