These were the two gaskets I was referring to.
Also is this a good deal?
http://cgi.ebay.com/ebaymotors/4L30E...QQcmdZViewItem
These were the two gaskets I was referring to.
Also is this a good deal?
http://cgi.ebay.com/ebaymotors/4L30E...QQcmdZViewItem
Yeah, hopefully someone else will chime in here. *I think* one of the gaskets goes on the tranny pan (the big one) and the smaller one goes on the pan that covers the TOD. If you look under your VX you will see both pans.
I changed only one of these that I can remember. That is a good deal, get it.
Bart
Originally Posted by JHarris1385
You will "need" the first gasket on the adapter pan (Small front one).
I say "need" because I think if you're careful pulling off the pan, the gasket will be fine - mine was ok to re-use.
The second gasket will only be needed if you decide to change your strainer that's up behind the larger pan (drain - fill). I never bothered with this one (yet).
The gasket maker is not needed if you have the proper size gaskets.
Get at least 12 quarts.
9 to 9.5 into the transmission and 2 to 2.5 into the transfer case. Get a bit more and you could replace your power steering fluid that is also ATF.
Take your time and follow Joe Black's how to closely.