I'm looking to do it with a transmission and transfer case that is close to what is in there now in size. The clutch pedal thing and the shifter hole in the floor is just some fabricating. No biggie really.

A little background.

I work at a north shore Maui 4 star restaurant, in the "backend". That means I design and build all the stuff underneath what you see in the restaurant. I worked maintenance for year there as well. I fab up the stainless stuf they use in the kitchen. We're growing at a rate of 15% a year, and one of our "things" is that each year when you come back, you see something new in the place. I recently designed and built three copper framed awnings.

One of the other things I spent six months on, was the ol' 36 Ford we have as a promo vehicle. I worked with another guy and we put the body on a 91 Ford Explorer chassis with a 302 V-8 breathing with the EFI from a Boss Mustang!! Fun project! It had an auto trans, but I had to fab up the entire stainless steel firewall and floorpan in the cab.


So, based on that experience, this job would be quite possible. I just need parts and as you say, time. Precious time.....