OK, well I know all there is to know about my doors and windows

Come to find out my claw was not broken at all. In fact, I didn't even need a new Window Regulator and I can't take this one back...

I found out the lubrication does help however...

I have window tint that was done while the window was perfectly UP and all the way in it's track/window seal. As it goes down all is good. When it goes up the window, even with very well lubricated seals, will come off track a bit.

I found the problem. If anyone has replaced or knows about Window Regulators you may know what I'm talking about. As you look at the regulator track when it's installed correctly, the left side of the track has a rail that the plastic claw slides up and down on. The right side, however does not. OK, check this out.

When I applied a little bit of pressure to the right side (simulated a claw being on the right side), the window goes up perfectly!!! However, due to the piss poor design of the track, the right side does not have a rail which means you cannot have a claw on the right side.

This is a freaking design flaw and I'm very disappointed. I will continue to add silicon just as you recommend but even with silicon the window still (both driver or passenger) won't go up perfectly and you can see the mistake due to the window tint.

If anyone has ever modified the regulator track or has fixed this problem permanently where the window goes up perfectly PLEASE PLEASE PLEASE let me know.

Isuzu...for such a beautiful ride, you really did drop the ball on the window regulator design...