Quote Originally Posted by etlsport
nice, its a lot of work! i just finished the footwells and roof from dome light forward yesterday.. actually kind of disappointed in the difference it made, im far enough into i now that i might end up pulling off the rear panels and doing the vertical part of the back too just because i want to hear a significant difference.. i only did the floor and doors.. never ending process... as for the black crap, i didnt have too much trouble with it, i stuck the sound deadener on, then went used an embossing gun to heat it up to mold and help the adhesion, i did accidentally run a piece into my window... which pretty much destroyed my window tint at least i got a lifetiime warranty on it, i just have to go and get it re-done

what does the fabric on the outside of the sound deadener do? (ensolite?)
I noticed a considerable difference in the doors (doing both faces). I want to do the roof (dome light to REAR) because that's the only place now where I can feel the vibrations with the sound system cranked. I cranked my system to 3/4 and went around the vehicle and felt the outside panels, the areas where I sound deadened have minimal vibrations. The roof however will vibrate off a soda can when the system is cranked. (and I don't have a powerful system! ~300W).

The Ensolite material is supposed to add another layer of absorbance, I need all the help I can get with that muffler of mine , road noise is only a factor at cruising speeds >50mph.