Quote Originally Posted by Ascinder View Post
As far as the "OME springs 1.25 medium" statement, I'm not real sure what you mean there, but most people I have heard of use OME 912 springs to lift and it is around 3" -period. To lift less in the rear(sounds like you're after an inch or so, you may want to consider using either polyurethane spring spacer along with your normal springs, or, what I did was use an adjustable steel spring spacer which allows you to more or less dial in the exact amount of lift you are going for just like the front. They cost less than a set of coil springs, less shipping cost, are adjustable, and then you don't have a set of stock springs lying around taking up space somewhere.
Ascinder-

Could you elaborate some about these SPACERS?
I haven't been too interested in a complete lift and with brand new tires, wouldn't need one for quite a while. However, I've had a small rubbing issue in the back of the front wheel well on the pass. side (which I think I finally have fixed as of today). But I have been considering raising the T-bars just a hair (i dunno, maybe an inch) just for clearance comfort, and could be interested in a slight raise in the rear as well. This method seems just the thing I've been wondering about.
Thanx much,

Cy