Rancho RS9000 Self Install?

[Knigh7s]

Thanks Kenny! Thats all I needed to know and then some! Also thanks for the picture reference!

I might be able to put a how to together for the install for future reference because of your (and community) help.

Thanks again!!!

[edit] That thread link still didnt show up on my search?! but all I had to do was add the "X" to the end for it to show up!

[Cobrajet]

Kenny, I noticed you have your front shocks mounted with the adjuster UP. Isn't that hard to reach? I have mine down, and easy to reach through the lower A-arm. I spent this week comparing the difference between full soft and full hard, so getting access to the adjusters was important. Handling really improved once I reached setting 6, 8 was a little firmer, and 10 was a bit too stiff for comfort. I'm going with 7 or 8.

I wish I had taken the time to spray my shock bolts with PB Blaster. The right front shock top bolt snapped off during removal. It was the last one I did, too. All the others came off without any problem. And that shock was one of the good ones. The left front was blown.

It's not hard to do if you have the right tools, patience, and lube.