Need help for Lift?

[CoastieCosta567]

hey every 1, i want to lift my VX but enough for rally, not for mudding or rock crawling, lol. but enough for rally so i can put some 31-32x10.0 inch tires for more meat on the road or dirt. but i need to know what do i need for that? like what are the springs i can get for it? where do i get them? price for both? where is the bolt to lift the torson bars, and like how much would it all cost me, just the lift. what do u guys think? how much should I lift? and are the stock shocks good enough for offroad/ rally or should i go for more heavy duty shocks? Thank You guys, u all are the best.


-CoastieCosta.

[JHarris1385]

912 Old Man Emu Springs $65ish a piece @ Rocky Road Outfitters.

That is simply all you need, stock shocks are great.

Torsion bar bolts are right below the B-pillar underneath near the frame of the VX.


That is simply what I have done to my VX.

[CoastieCosta567]

"Torsion bar bolts are right below the B-pillar underneath near the frame of the VX." <---- where is this at, can't find it? and is it hard to put springs my self or i need a tech to do it?

[JHarris1385]

Trust me I have NEVER worked on a 4x4 before, and this only took me about 30 minutes to do. Just liquid wrench the torsion bolts the day before, for easier cranking.

A how-to can be seen here.

http://www.planetisuzoo.com/articles...Bar_Adjustment

[JHarris1385]

Oh by the way I put the springs in by putting a block of wood on a jack and lifting the VX by the gas tank, just make sure to unbolt the shocks to make it easier.

[CoastieCosta567]

so this adjuster is located at like past the middle of the VX more to like the rear? if so, how can that lift it, if it's more to the rear?