driving light questions

[etlsport]

costie.. yea i saw those kits there on ebay and was seriously considering them

vehigaz.. thanks for the input, thats about the response i figured id get, looks like ill have to buck up

anyone have any experience with these?
http://store.summitracing.com/partde...5&autoview=sku
in my experiences summit has had good products, and these are much better priced than piaa or kc..

[Chopper]

Lights and tires... cheap out on either, and you are making a mistake. Cruisin' Roosevelt Bvd., at 2am, lit up like a U.F.O. might be interesting. It is all about mount strength, filament durability and such; no impact concerns, with them top side and all. I'd look for wiring access under the roof rails. Drop the headliner, pull the rails, and get creative... or use the wing holes. Get the black urethane, goop type sealant. Don't use silicone on roof holes. It will eventualy leak. The stuff in the caulk type tube, from 3M is the shizzle. Let it squeeze out, then clean up the extra. p.s. don't over tighten the rail mounts... break that uv aged plastic, and you'll be cryin'... use lock-tite, not torque. Wayne

[etlsport]

thanks chopper! definately stuff i would have overlooked/not known, my lights should be getting here tonight or tomorrow.. went with the summit racing ones, ive never wired lights this big before so i wanted to make sure i had everything right.. heres my wiring diagram... the wire ive got is all 14ga



this gonna blow anything up? haha

[etlsport]

bump.. lights were delivered.. so installation starts in t-minus 3.5 hours.. no feedback on the wiring?

[etlsport]

and holey crap they're bright... wiring through the engine bay is done, tomorrow wiring will be run up to the roof