18" American Racing Wheels

[Chopper]

I feel ya retire... it really is a huge PIA having a "unique" wheel arrangement. Maybe consider sanding the oem's down and having them powder coated. Cheaper and better looking than most alternatives.

[JHarris1385]

Retire those were not six lugs.


Grober go to a local wheel shop and do a test fitment with another wheel with simalr specs. I have 4.5 backspacing on mine with 265/75-16 tires. They do not stick out much at all. Almost flush. Honestly with that wide of a tire and no lift you will rub on the back front fender well. Nothing a little hammering and help. But if you really desire this look, it would not hurt to midly crank your torsion bars.

PM wormgod i forgot his set up but he has some fattys without a lift.

[I_Wanna_Retire]

What are not 6 lugs? Isn't that what 6 x 139.7 means? Both Avenue A520 and the Ion wheel come in 18 x 9, with 6 x 139.7, about $144 each.

[JHarris1385]

I did not see the listings for 6 lugs, my bad

[ZEUS]

Retire those were not six lugs.


Grober go to a local wheel shop and do a test fitment with another wheel with simalr specs. I have 4.5 backspacing on mine with 265/75-16 tires. They do not stick out much at all. Almost flush. Honestly with that wide of a tire and no lift you will rub on the back front fender well. Nothing a little hammering and help. But if you really desire this look, it would not hurt to midly crank your torsion bars.

PM wormgod i forgot his set up but he has some fattys without a lift.

Wormgod was my inspiration for grabbing my wheels and I matched his setup numberwise exactly... that is until I got lift springs. Grober is talking about a 33" tire here so a mild cranking of the t-bars will just not work. The guy needs a lift to fit what he wants.

[grober02]

I guess I'm confused at littlelaurie's setup since she has 285/65/18s and states that there is no lift. She used to have a 3" lift, but no longer...

[nfpgasmask]

My guess is she must have switched back to a smaller tire/rim setup if she took out her life. Even with my setup the front tires just rub a tad on the front cladding. I probably could have gone up one size on my tires, but I like the way it looks and I barely trimmed at all. For me personally, I think 16" rims looks the best on the VX.

Bart

I guess I'm confused at littlelaurie's setup since she has 285/65/18s and states that there is no lift. She used to have a 3" lift, but no longer...

[ZEUS]

I feel ya Grober... I can tell on LittleLaurie's VX that the t-bars are still cranked quite a bit. There is usually a rake to the VX's stance but hers rakes to the rear. Notice how much room there is between the rear tires and the wheel well and how much more there is at the front. There was either a lot of hacking going on and hopefully some bumpstop extensions or her tires are rubbing the plastic away. I hope she contacts you soon bcuz I would like to know what's going on myself. I'm just speculating... maybe she is getting away with it alright but I know I would not be able to.